I switched from a Benz Micro Ace lo to an Ortofon 540 MkII. I made the switch because I couldn't turn the volume down enough on my preamp without loosing the left channel. My volume pot is a little worn out down near the bottom of it's range. My mc section has a lot of gain so I got the 540 to use my mm section. I expected to not like the Ortofon as much as the Ace but I actually like it just a little more. It looses a little of the top end sparkle that the Ace had but it is just as good in the mids and the bass is fuller. It rocks more than the Ace does and it seems to have less surface noise but that could be the difference in gain between my mc and mm sections.
I have a VTL TL5.5 with built in phono and use Mullard 12at7 and RCA 12ax7 tubes in the phono section and a SOTA Sapphire with Graham Robin.
Cheers,
Jim
I have a VTL TL5.5 with built in phono and use Mullard 12at7 and RCA 12ax7 tubes in the phono section and a SOTA Sapphire with Graham Robin.
Cheers,
Jim