It isn't for bridging, it is for bi-wiring your speakers.
McCormack DNA 750 mono block amps
Hello , Could anyone please assist me in letting me know if these would work good with my King Sound King electrostatic speakers . Looks like there are two sets of binding posts on these . If they are a stereo amp that gets bridged I know they will not be good with my speakers . Thanks in advance , Mike.
also, I use a Knobsound volume pot coming from either my exogal dac or Sony Hapz1es music server.
DNA-750 mono-block amplifier is the proverbial iron fist in a silk glove. With up to a kilo-watt on tap (4 Ohm load), the DNA-750 has the muscle to move and control any loudspeaker system available today, all the while demonstrating remarkable poise and ease. At the same time, it offers a degree of refinement and finesse that few amplifiers can match. In the DNA-750 power and grace combine to bring you closer to the music.
SPECIFICATIONS
Output Power: 650 watts into 8 ohms, and 1000 watts into 4 ohms, from 20 Hz to 20 kHz
at 1% THD.
Input Impedance: 13 kOhms
Input Sensitivity: 3.1 Vrms
Voltage Gain: 27.4 dB
Frequency Response: -3dB @ .5 Hz, 65 kHz
Signal-to-Noise: 112 dB
Harmonic Distortion (10 watts, 1 KHz, 8 ohm load): .1%
Signal Polarity ("Absolute Phase"): Non-Inverting
Power Requirements (117V/60HZ): 0.7 Amps /84 Watts @ idle
6.8 Amps/ 820 Watts @ clipping (8 ohms)
Dimensions: 19" W x 6 7/8" H x 15 D"
also, I use a Knobsound volume pot coming from either my exogal dac or Sony Hapz1es music server.
DNA-750 mono-block amplifier is the proverbial iron fist in a silk glove. With up to a kilo-watt on tap (4 Ohm load), the DNA-750 has the muscle to move and control any loudspeaker system available today, all the while demonstrating remarkable poise and ease. At the same time, it offers a degree of refinement and finesse that few amplifiers can match. In the DNA-750 power and grace combine to bring you closer to the music.
SPECIFICATIONS
Output Power: 650 watts into 8 ohms, and 1000 watts into 4 ohms, from 20 Hz to 20 kHz
at 1% THD.
Input Impedance: 13 kOhms
Input Sensitivity: 3.1 Vrms
Voltage Gain: 27.4 dB
Frequency Response: -3dB @ .5 Hz, 65 kHz
Signal-to-Noise: 112 dB
Harmonic Distortion (10 watts, 1 KHz, 8 ohm load): .1%
Signal Polarity ("Absolute Phase"): Non-Inverting
Power Requirements (117V/60HZ): 0.7 Amps /84 Watts @ idle
6.8 Amps/ 820 Watts @ clipping (8 ohms)
Dimensions: 19" W x 6 7/8" H x 15 D"