2. speakers
  3. 1293909973

Loudspeakers - how best to prolong their lifetime?

Another thread, regarding obtaining speakers "for life" got me thinking about the lifetime of our speakers. Let's assume, for the sake of the argument, that we have a set that we really don't want to lose (just what I own right now). Is there anything that one can do to prolong their lifetime? We'll assume that we look after them regarding the power that we throw at them and that we don't play them excessively loud and blow the cones.

I recall my first "real" speakers, which were Castle Kendals. After a few years in storage, following an upgrade, I went back to them to use in my third system. They sounded terrible when I connected them up and the removal of the grill showed just why - the cone's foam surrounds had disintegrated! I pulled the two sets of spares out, ones that I had obtained from Castle as backups, and they had also gone belly-up. My current speakers have glass-fibre reinforcement so I expect some longevity.

Is there anything to do or do we just have to take what we are dealt?
niacin

Showing 5 responses by hifihvn

hifihvn
943 posts
 
I've had a local dealer do mine in the past. They did ok,but weren't expensive speakers.If I had some that were of higher quality,I may use a company that does specialize in it.One that comes to mind is Millersound.They seem to have a good reputation.There may be other ones,that people will recommend too.Link for them.[http://www.millersound.net/indexfl.htm]
hifihvn
943 posts
 
Large woofers should be rotated 180 degrees every couple of decades as well, if possible, to prevent stresses on the suspension.

There are a lot of vintage speakers like Viridian mentioned that have doped surrounds.50s through 70s,and probably a lot of other years,I'm missing.These have a syrup looking type of coating on the surrounds to protect them,and keep them flexible.When that liquid sags toward the bottom,I was told to rotate them 180 degrees also.I'm not sure how often this needs to be done.Maybe going by looks,if it's sagging.Keep out of the sun like mentioned above.A lot of hard driving may age the glue holding the voice coil quicker. The foam surrounds could be changed like mentioned above also.With the foam surrounds,if you see the break/hole in them,don't use them.If you use them this way,you could damage the rest of the driver.If you catch it quick enough,they may just need new foam surrounds.The non-foam surrounds seem to keep on going,as long as they're not abused.
hifihvn
943 posts
 
I'm not touching that one.
hifihvn
943 posts
 
Hopefully,someone will have a place for you.If not,maybe start a new thread."Speaker Surrounds in the UK".Or something on that order,to get the attention.If your good at doing it yourself,some people do their own.They sell kits for it,but never done one myself.I'm always worried I won't get the cone centered just right,and ruin it.
hifihvn
943 posts
 
I don't know anything about this place,as far as buying from them.I'm just putting it on for the last resort,to give you an idea,for doing it yourself parts.Link.[http://www.speakerworks.com/speaker_repair_kits_s/65.htm]
More to discover