2. cables
  3. 1325256894

Long interconnect cables

Hi All,

I am considering moving my equipment to the side of my listening room and retaining only the amplifiers between the speakers.

If I were to do this it would obviously mean running a longer than normal interconnect from the preamplifier to the monoblocks (maybe around 4 feet). I'd be interested to hear from others who have done this and whether it represents a compromise sound-wise or whether anything can be done to ensure that the sound is not affected.

Thanks

James
vicks7

Showing 1 response by kbuss

kbuss
9 posts
 
The are a variety of factors involved in your question. The single most important question is related to the output impedence of your preamp. In short, the lower the better. Long cables need current from source to drive the signal. The input impedence of your amps are also a factor, and there is a ratio between output Q of preamp to input Q of amp that is ideal. The damping factor of amp can also be a factor. Today, generally, 50 ohms is considered a low output Q. (Personally, I like lower still. There is no substitute for current or horsepower...) You should have no problem driving up to a 10 meter length of single ended (RCA) cable if the output of your preamp is in the 50 ohm range and the input of your amps are in 50 - 125K range. As a final thought, you will also want to keep the capacitance of the cable relatively low.
In this context, I'm driving a 7.5 M S/E cable effortlessly.
Hope this helps.
More to discover