2. analog
  3. 1014082488

Linear tracking vs. Pivoted tracking tone arms.

After searching all 735 existing analog "threads" I only found one short discussion regarding Linear tracking arms vs. tangential tracking arms. I have been a vinyl collector for over 32 years, and beleive that pure analog is still the "gold standard". In 1984 I purchased a Sony PS-X555ES linear tracking, biotracer, turntable. It is a fully automatic table with direct drive. This table has served me well, with no mechanical or set up issues. It is still in my system today. There are no adjustments other than balancing the tonearm to a netural position, then dialing in your tracking force. Two years ago I installed a Denon DL 160 moving coil cartridge, and am very pleased with its quality. I am considering retirement for the Sony and replacement with a Michell Gyro SE with Rega pivoted arm. Linear tracking arms are not availiable. This is a belt drive, full manual table. I understand that the master LP lacquer is cut on a lathe with the linear method. Should vinyl be replayed in the same manner for optimal sound? I would really like to hear from some hard core audiophile vinyl types on this one. By the way, my system consists of the followinig: Conrad-Johnson PV10B all tube pre-amp with tube phono stage. This is split into a C-J Primer 11 tube amp and C-J MF2250 FET amp, bi-amped into a pair of KEF Reference series 3-2 speakers. The Premier 11 feeds the mids and highs and the MF2250 feeds the bass section. All cables and interconnects are Monster Cables finest. Thanks in advance for any advice.
lbo

Showing 1 response by greggey

greggey
9 posts
 
Lbo, I believe that theories of tonearm design are less important than their execution. I was a long-time owner of a linear tracking ET2 tonearm, with its unique air bearing mechanism, but now I am the happy owner of a VPI 10.5.
I think the Michell/Rega combination will likely yield better sound than your Sony, given its belt drive system and the strenth and rigidity of the Rega arm. Those features are just as important as linear vs. tangential. Of course, you want to assure proper overhang and anti-skating, but those should not be a problem.
More to discover