Kimber 8TC - help with termination

bi-wire works best when different cables are used for the run...not making the one wire work for both upper and lower connections. If interested go to Vandersteen.com for an explanation.

There's a good picture of properly terminated 8TC here.

I have the same problem. I have a 10ft run of 8TC but don't know if its better to run them straight w/o biwiring or whether I should do as Timrhu states and do a 3-high, 5-low bi-wire....

I'm running them from a pair of MFA monoblocks to a pair of biwirable Snell Bs.

Thanks for any advice,

Tim

I used to work for a Kimber dealer and have some experience with doing this. 8TC is a little more complicated than the others but basically the same. You will want to carefully unwind the ends and spread the conductors apart. The aim is to have just enough length to be able to seperate the postive (blue) and negative (black) and be able to selectively reaggregate them to their respective bundles, ideally without having either side with a stray strand over the other.

Exactly. If you want to set up biwire, I suggest using 3 wires for the treble and 5 of them for bass. They work very well this way. Good luck.

That's exactly how you do it.

Dale