Isotek EVO3 Syncro UNI

Hi All,

I did some researcher and can't find mutch user input on the Isotek EVO3 Syncro Uni. I am thinking in buying one, to connect it to my power conditioner, and would like to know it it delivers what it promises or more?


thanks for your input




Hi All,

Apologies for my absence, and thanks for your input. I’ve purchase the EVO3 syncro  Uni for my setup and I’ve been running it for about 4 days.

I purchased the 16A version with the C19 plug, and I plugged it like this:

Input cable is a generic copper cable with 4.4mm cross section, output cable is a Silver edition Purus Cable. The Purus cable then connects to BP-2400 Balance conditioner and then I use the same Silver Purus cable to all my gear.

My first impressions (first day) was that the system tended to the live side, with deeper base, snappier response and some (not much) increase in the micro detail.

Over the following days the system tended to a more softer side but still maintaining the snappier response and the micro detail. I’ve also notice the amps seem to run less hot than before.

I believe it is difficult to judge how much DC one has on its system, however it is one of doses componentes that protects the degradation of ones system in the long run and for that alone is a must have.

I will have to change the input power cable, but currently I am happy with the results. Not shore if the sound signature will change much more but so far It is a great product.



They also have the syncro power cable, which is expensive at $2k but if you use it in conjunction with one of their power conditioners you get then benefit of both.  I have the syncro plugged in to the Evo Sigmas, and find it to be a great combo.  I have no Idea how ‘much’ DC I have on my line, and I have no hum in any equipment I have ever used without the Syncro, but having tried several other cables between the wall and the Sigmas I found the Syncro to yield the smoothest and most refined results.  I always plug my amp(s) directly into the wall, though, important to note.  So my results are for other components.  

I don't own the EVO3 Syncro UNI.  I own a Titan (used with power amps) and an EVO3 Sigma (source components and linestage).  I bought them after hearing a compelling demonstration of their products at a dealership.  They make good power products.

My understanding is the the UNI is primarily used to kill DC on the line that would cause transformers, particularly toroidal transformers, to physically emit hum (not hum coming from a speaker).  Is this what you are trying to achieve?  It is noise coming from the speakers, their other power treatment might be a better choice.  At the dealer demonstration, I was impressed with their basic power strip--it reduced most of the noise on the line, with higher up products delivering a smaller increment of improved sound, albeit, at a considerable increase in price.  The treatment improves the sound even when there is no actual "noise" that one is hearing in the system.

How much improvement you hear will depend entirely on how "dirty" the electricity coming into your house is in the first place.  "Cleaner" AC--law of diminishing returns.

We are an isotek dealer these devices do work and will improve the sound quality  of a power conditioner