Is two Subs better than One?


What is the general consensus? And why?
hamburg

Showing 5 responses by rauliruegas

Dear Hamburg: Yes, IMHO two subs are better. Why?, well these next info are what already was/were posted in another thread where are an explanation of the whys with a little different treatment:

+++++ " My approach is different from yours, mine goes to obtain ( first place ) a better quality performance in my main speakers and in second place to achieve a better quality bass performance that could goes lower too.

I use two subwoofers in true stereo way to achieve those targets, the first one ( that you can't achieve with your approach of one subwoofer. ) is obtained lowering the Intermodulation Distortion ( main speakers ), this means to stop to ask to the woofers ( main speakers ) the simultaneous reproduction of frequencies between 20Hz and 200HZ or higher( if yours goes flat to 30Hz then you still have some distorted response at 20Hz that makes higher the IMD subject/problem ), this means ( again ) that we have to choose a crossover frequency higher than what the main woofers are handled : in my case 60 Hz and in Eldartford 80Hz.

In this manner the main woofers will be free/less stressed of the low bass reproduction working from 60Hz-80Hz up and lowering ( cleaning in deep ) the IMD: this fact makes a huge improvement ( in any speaker including yours ) in the quality sound reproduction of the main speakers ( it is not matters what you think about or what I think about, lowering the IMD/HD always improves the quality performance of " that " driver, physics laws. ).

The second advantage on this approach is that now the low bass frequency response not only goes down through the subwoofers but with a better quality bass performance due that those bass frequencies will be reproduced for " drivers /amplifiers " that were designed specific for those kind of bass frequencies. " +++++

+++++ " Where the subs can help us ? :

Intermodulation Distortions ( harmonic distortions ): Almost any three ways speaker ( all two ways/one way ) has it's crossover frecuency ( low driver ) between 150Hz and 450Hz. I can assume that any of ours speakers system goes down flat ( at least ) between 60Hz to 20Hz.

What does that means ?, well that a single driver has to reproduce frequencies/harmonics from 20Hz/60Hz to 150Hz/450Hz. With that kind of frecuency range here exist a great intermodulation distortions that put it's " color " on the sound reproduction.

You have to imagine that that single woofer/driver has to reproduce, at the same " time ", a 30Hz frecuency along a 350Hz frecuency ( Downunder in your case from 20 to 450Hz ): here is where exist that IM/HD that gives heavy distortions in what we hear ( there is no perfect driver: moving coil, electrostatic, ribbon, etc.. The speaker designers has to choose the best " trade offs ", but the distortions are there. ): less clarity, less resolution, less precision, less natural balance, less pitch, les, less, less......., and this is what we are really hearing: LESS MUSIC.

What happen when that low driver is free from those frecuencies ? ( main speakers: monitors or full range, it does not matters. My main speakers are flat to 22Hz and only 5db +.- at 18Hz and I have benefits with the subwoofers integration to my system ), below 60Hz:

SUDDENLY the " lights are on ", your music/audio " life " its born: the mid bass is clean, the midrange is clean, the highs are clean: high resolution every where ( the distortions are almost gone ), and now you can really hear for the first time the MUSIC through your home stereo audio system: what a pleasure!!!!!. " +++++

Mark the second subwoofer is not to obtain more bass but to even and smooth the room bass response:

08-02-05: Skushino
After adding a second sub to my system, there was smoother bass response. Again, this isn't about louder or stronger bass, in fact, I was seeking lower, smoother bass. Ironic that the path to this goal was accomplished by adding a sub! My girlfriend is a great listener and concurred that bass was better quality. Since I returned the second sub (on loan from my neighbor), I miss the performance " +++++

+++++ " this quote comes from a friend ( Agon ) that send to me for this thread. The research/investigation or whatever were made by: Audio Perfectionist Journal and Vandersteen:

+++++ " Suppose I told you that you could add two
components to your system that would reduce
intermodulation distortion in the midrange by a
factor of two or more, dramatically improve the
resolution of midrange and high frequency detail,
double or triple the dynamic range capability of
your system without changing your existing
amplifier or speakers and improve imaging more
than you can imagine. You would probably be
interested, right? But wait, there’s more.
These same components would allow the
amplifier to maintain tighter control over the
speakers in the mid-bass and lower midrange.
They could extend bass response to infrasonic frequencies
while lowering bass distortion and
improving the system’s ability to accurately convey
the rhythm and pace of music. And these
same components could virtually eliminate the
uneven response at lower frequencies caused by
room standing waves.
Does all that sound too good to be true?
Are you concerned about the possible cost of all
this improvement? If all this is so easily achievable,
are you wondering why you’ve never heard
about it before?
Let me assure you that all these sonic
improvements can be yours and I’ve been conservative
in my estimates of the level of audible
improvement you’ll get.

and goes on and on...... Conclusion: two subwoofers!!! +++++ "

this is another quote on the subject:

+++++ " - There is no single external / stand alone amplifier that can work or do a better job than a low bass dedicated amplifier like the one that comes with a powered subwoofer:

think that this dedicated bass amplifier was designed/tailored to match every single woofer parameter: impedance, frecuency response range, damping, power, distortion, etc, etc,...

- It is not only this dedicated amplifier what makes this subwoofer approach/technology ideal to handle the low bass octaves.

The driver/woofer is designed/tailored too for that specific frecuency range.

There is no passive FRS ( full range speaker ), at any price with any amplifier, that could beat a self powered subwoofers in that frecuency range. When you have and hear the subs on your system you never can live again with out those subwoofers.

Here we have to remember other important issue: the best subwoofers are SERVO CONTROLLED, this characteristic give to the subwoofer a heavy advantage over a FRS about the low distortion that a well designed subwoofer had against a higher distortions on any FRS.

- With a subwoofer we not only gain with a lowest harmonic distortion but with a lowest intermodulation distortion ( main speakers )too. This means better quality sound reproduction.

- Other advantage is that with the integration of two subwoofers in a true stereo fashion to a full range speakers system: the main ( s ) amplifier will be free of those high power consumtion low bass frecuency range: this means too, better quality music sound reproduction. No exception.

- Other advantage with the subs integration is that facilitate the integration of our mains speakers to the room.
" +++++

+++++ " I discovery ( for my self and I'm not saying that I discovery for all and I'm not saying that was the first one or that it is the only " true ". ) for my self ( testing one and again ) and not looking for, that the subs make a lot difference but for other things than the low/deep sound reproduction: suddenly I learn about!!!! and the experience is so " unique " that I put this thread to share about with all of us, the name of the game: LOWERING THE IMD/HD of the main speakers ( almost any ) with the integration of two subwoofers!!! " +++++

Regards and enjoy the music.
Raul.
Dear Richard: You can't believe the paramount importance of that subs subject till you have the opportunity to experience on your own system where you will be surprised of the high level of the quality performance improvement on the response of your system: you will discovery a " new world "!! and from that first moment you can't go back !!!

Almost all of us when we are talking of subwoofers immediately think on " more and better low bass ", almost non of us think in how/where we really take great advantages to improve the quality sound reproduction of the main speakers and the main amplifiers too, well the integration of subs to our systems can/could do that and more!!!

Regards and enjoy the music.
Raul.
Dear Baam23f: The Mhalers are very good/clever thinking design and that's why they choose to lower the normal IMD/HD, that exist on almost other speaker designs , crossing from midrange to the low drivers around 70-80hz and this is exactly what I'm talking about.

Now, you choose too a very well matched amplifier ( bryston ) because the Mhalers goes down near 2 Ohms in the low bass and the Bryston has a very low output impedance and the power to handle easy.

+++++ " I believe that if the mains are made with quality it's an overkill to cut them out, especially in my case.." +++++

I agree with you.

+++++ " I will buy a stentor, and then I'll try to integrate the two " +++++

I like and respect your wide " open mind " on the subject. Which are my thoughts here?:

well, IMHO the integration of two subs in full stereo fashion ( by-passing the Mhaler low drivers. ) in your system could help ( maybe ) not only to go deeper on the low bass but more important than that could be two things ( between other less important ones ) : leave the Bryston free of work in the 70-80hz/down frequency range and in this manner is probable that the Bryston improve its quality performance in the main remaining frequency range.

The second thing is that because the low mid-bass/low bass frequency range will be handled by two subwoofers where its drivers were specific designed for that range ( same as Mhalers but these ones goes to 30hz -5db and -10db at 22hz and we don't know with which distortions level. ) and where those drivers are paired with amplifiers that match exactly the subwoofers parameters: frequency response, electrical impedance, damping, power, distortions, etc., it could be that you could have a quality improvement.
Like you say: " We will see ".

Regards and enjoy the music.
Raul.

Dear Downunder: It is no surprise here that like always you don't " read " what is posted.

this was my answer to Baamf23 post about:

+++++ " I believe that if the mains are made with quality it's an overkill to cut them out, especially in my case.." +++++

I agree with you.

then he posted:

+++++ " I will buy a stentor, and then I'll try to integrate the two " +++++

and this was mine:

+++++ "
I like and respect your wide " open mind " on the subject. " +++++

along this I only give my thoughts about, nothing more.

Your post: +++++ " subs is plain and simple stupid .." +++++

like always speaks for who you are.

Regards and enjoy the music.
Raul.
Dear Samuellaudio: Some Preamps and processors come with two main outputs but if yours comes only with one pair then you have to use a Y connector where the left output goes to the left sub and the right output to the right sub, that's all.

Some preamps comes with a tape loop design where you have one pair of line outputs where you can take the additional " signal " to the subs instead the Y connector.

Regards and enjoy the music.
Raul.