Another vote for tweezers. I usually mount the cart on the arm LOOSELY, then attach the clips, then tighten the cart screws, checking the cart alignment with your protractor of choice. before the final tightening. All. Very. Carefully.
A handy hint. Roll up some Mortite (plumber's putting) or a Blu-Tack equivalent so you have a thin cylinder -- something you can twirl between thumb and forefinger -- that's about an inch long and use it to hold the nut and/or tighten the screw before you use a screwdriver for the final tightening. Good luck, Dave
A handy hint. Roll up some Mortite (plumber's putting) or a Blu-Tack equivalent so you have a thin cylinder -- something you can twirl between thumb and forefinger -- that's about an inch long and use it to hold the nut and/or tighten the screw before you use a screwdriver for the final tightening. Good luck, Dave