How much difference could a simple Banana plug make?


Well - I've tried several different types of Banana connector over the past 8-10 years and although there were subtle improvements from one plug to another, there was never any "remarkable" improvements.

That was - until yesterday !

My - how things changed :-)

If you search the forums, you'll find several posts and reviews by me touting the benefits attained by using products from KLE Innovations. I like them a lot and consider them among the best products in the market.

The  KLEI™Classic Harmony Banana Connector/Adaptor is not just "another Banana Plug"

https://kleinnovations.com/kle-innovations-klei-products/klei-harmony-banana/klei-classic-harmony-ba...

To start with, it is designed to be multi functional - you can use it as...
- A single Banana Connector
- A stack-able Bananas Connector - e.g. it allows you to easily attach jumpers  when connecting a single cable to a bi-wired speaker 
- A Banana Adapter - e.g. as a temporary connection of bi-wired cables to a single wire speaker i.e. without leaving one set not connected.

There may also be other uses that I am yet to discover.

What makes these plug so special
1. they boast an impressive IACS conductivity rating >101%  - that's impressive for a copper product
2. they are engineered to allow another banana plug to be inserted into the insulated housing
3. they have perfectly round spring pins - most spring pins are not completely round
4. they fit into all of the banana terminals I have tried with an unforced "snugness" that grips the speaker and amp terminals securely.
5. they are dead simple to connect using solder
6. removal is also very easy if you want to try them on a different cables

KLE Innovators state they can be crimped, but that's not something I would personally try - perhaps that have a special crimping tool?

So how did this unassuming looking little banana improve sound quality ?...
1. the most noticeable improvement was the width and depth of the image - much bigger than my room
2. overall clarity was front and center and added some nice "sparkle" in the high end
3. instrument placement and isolation within the image was improved
4. The dynamics were noticeably faster.
5. additional texture in bass lines were very nicely reproduced

I think the best genre of music that shows off the full capability of these bananas is classical - even my worst recording sounded very spacious and allowed be to discern the distinct boundaries of first/second viollins, violas, cellos and double bass sections within the orchestra and the added depth placed brass, woodwind and percussion in equally isolated spaces front to back within the image

"Is This Love", by Bob Marley was cavernous and sounded like it was being performed in a stadium!

These connectors also excel in allowing micro details such as subtle venue reverberations and reflections to be more noticeable than with any other banana connector I have used in the past.

If the speaker cables in your system utilizes a more standard Banana plug -  I'd highly recommend replacing them with the KLEI Bananas.

Cost is $135 Aussie Dollars (about $100 US)

What did I use before these?

The most recent was a spring connector from ebay like this
https://www.ebay.ca/itm/4x-Acoustic-Copper-Silver-Plated-APS5-Speaker-Cable-Banana-Plug-Connector/30...

Other "named" products included Spring Banana plugs from Neotech and a pure copper connector from Furez - none of which performed to the level of this plug

There are not many products that improve sound this much for $100 - go on - give em a try!

Back to the tunes :-)

Steve
williewonka

Showing 9 responses by lak

As I mentioned in a PM to williewonka I have 16 of these KLEI™Classic Harmony Banana Connectors ordered and I hope to receive them by or before December 1st. I'll use WBT 4% silver solder and burn in the bananas using my Audiodharma Cable Cooker. The bananas will attach to 
Duelund DCA 16 gauge wire and a pair of Heavy duty Western Electric 10 wire. I'll keep you posted here regarding the results.
I received 16 of the KLEI™Classic Harmony Banana Connectors and finally made time to use WBT 4% silver solder on my Duelund 16 gauge (top terminals on speaker) and 12 gauge (bass terminals on speaker).
I must admit that the KLEI™Classic Harmony Banana Connectors are simple yet very well made. Easy to solder and I really like the design where one can piggyback the bananas together which is what I did to connect to the terminals on my CJ Classic Sixty SE amp. The design for banana tension is also very good.
I used my Audiodharma Cable Cooker and burn in the bananas and Duelund wire (which was already good to go) for 136 hours and this morning I transferred the speaker cables over to my system and will allow additional hours for settle in time before I attempt to say anything else about the bananas other than if you are in the market for bananas you should definitely consider these..
@yping  After some additional settling in time and use, I believe I can hear more details using the KLEI™Classic Harmony Banana Connectors vs other expensive bananas that I have used or bare tinned wire with no connectors. This is contrary to the way I thought all would turn out but I trust my ears.
@williewonka I have not tried you "QUESTION" from above however as soon as I have some time I'll definitely try it...thanks for the suggestion. I'm always open to suggestions...
@yping for a lack of a better explanation I would say that the microdetails sounded more focused, as perhaps the rest of the music. I'm hesitant to say anymore because after several days of listening to the speaker cables with the KLEI™Classic Harmony Banana Connectors I removed an interconnect and replaced it with the new Cerious Technologies Matrix interconnect. 
@yping, from what I remember and checking my notes other banana connectors I've used are: Cardas CABD Double, WBT 0610 AG, WBT
0610 CU, and Furutech CF 202 Rhodium. I'm sure there were others but I don't remember.
I'm willing to bet that williewonka has experimented with  many more high quality bananas than I have.
@yping I'm glad that you like the KLE Innovations classic harmony bananas, it's always nice to have others confirm ones thinking.

@williewonka thanks for your original post that opened my eyes to this fine product!

Happy New Years to all...
I totally agree the KLEI Bananas work well, are easy to install and sound very good. 
My only concern after using twelve pairs of the KLEI Bananas is when the KLEI Bananas are used, depending upon the size of the female amp/speaker terminal opening it's being inserted into, the male end of the banana might not fit securely into the female amp/speaker terminal and needs to be manually enlarged. With a heavier speaker cable (my example Duelund Tinned 16 and 12 gauge very lightweight vs Oyaide TUNAMI II NIGO speaker wire much heavier in weight do to heavey outer covering) it tends to stress the lightweight KLEI Bananas but it is still doable.