High performance electric outlets


I just moved into an apartment which has the weakest and most feeble outlets I have ever seen. There seems to be so much confusion and controversy about this subject that I have no idea where to start.

My apartment has the electric panel in the pantry closet, so I will be able to draw 220V for my ONEAC 3000W isolation transformer. The transformer has two 110V outlets and feeds all my system. I would also need two or three more outlets in a power strip next to my equipment.

Should I just get something like two of those orange Leviton Hospital Grade outlets from Home Depot ($11.00 each) to replace the ones in the isolation transformer or is it really worth to go the 'audio grade' route? If so, how can I make an educated decision?
psychicanimal

Showing 2 responses by alanmkafton

"My understanding is that for hospital purposes they have a treatment that is not good for audio applications."

Ksales......I don't mean to throw a wrench into the works, but this is not exactly correct. For the hospital grade outlets, Hubbell uses a different, and higher-impact resistant face material (rather than the nylon used on non-hospital grade products) and bright-nickel plates all the power contacts and metal strapping. The multi-layer plating insures the metal won't oxidize or corrode, especially in a medical environment.

Sonically (and I beta-tested these units with others), the 8300 and 5362 are *very, very* close. They are both quite musical, with an extended and smooth frequency response. The 5362 gives a "slightly" more laid-back or relaxed presentation, the 8300 a "slightly" more immediate (one customer described it as more 'intimate') presentation, as if you moved your listening chair a bit closer. Again, these differences are ones of subtlety, not night-and-day differences.

From my understanding, bright nickel plating is on a different level than standard nickel plating, about which many have thought to have sonic problems, and consequently, have labeled anything with nickel plating to be "bad". In the Hubbell's case, au contraire.

I hope this information helps.
"Do you know what the physical differences between the 8300 and 5362 are?"

Other than the bright-nickel plating and differing face material of the 8300, they are *identical* in construction and size/dimension......again, identical. The brass alloy for the power contacts, etc. is identical as well.

"Have you ever had an 8300 cryo'd? If so, what were the differences?"

Yes. All the 5362's and 8300's I'm offering ARE cryo'd....in fact double-cryo'd. I mentioned the sonic differences (between the two duplexes) in my previous post. If you're asking about the sonic differences between a cryo'd 8300 and a non-cryo'd 8300, I can't offer an opinion, as I never did such a comparison. After cryo'ing a few different test items earlier in the year, I decided to cryo *everything*, as the sonic rewards were clearly evident to my ears. As of tomorrow, all my system cabling (and extras) will have undergone double-cryo processing so I can listen to music again!