Atmasphere: thank you for your additional input. How difficult is it to set up a new cartridge? Thanks again you have been very helpful.Not at all. The Grado is known for doing this in Rega turntables because their motor is ungrounded. Its an entirely different matter with a direct drive and won't be any issue at all. The setup isn't hard if you have a decent protractor.
I am certain my local dealer would lend me a better phono preamp, but right now my system sounds a little better than my mid 1950’s Sony transistor radio (Sony’s first product imported into the US). Once I get better sound, I can consider a better phono preamp. I am retired now so I have some time to experiment again with vinyl. Thanks for you input.
One other question please. I have read that the Grado cartridge may not be the best match for a direct drive TT. Presumably it may develop hum from being so close to the motor. Does you experience with Grado suggest that this to be a problem?
Help me rebirth my old turntable
I just “found” my Dual 604 turntable with a Acutek Red cartridge after more than 30 years in storage. Plugged in the turntable and it actually turned which did surprise me. Since I have less than 100 records which I purchased in the 1950’s-1980’s, I decided I would put very little money into getting the turntable to work. I purchased an inexpensive phono preamplifier, the Hagerman Bugle 3. I connected it to my amplifier ( Gryphon Diablo 300 connected to my Sonus Faber Amati Traditions). The system does work, the noise level is low, but of course it does not have the soundstage, sparkle or high frequencies of my digital system (PS Audio Directstream Dac, memory player, and Bridge II).
I realize that trying to compare my analog equipment to my digital equipment is totally unfair. However, I was wondering if I could improve my analog sound by replacing my current cartridge and if so what cartridge would you recommend for my 604 turntable? I realize that unless I spend a lot more money, it is unlikely to equal the quality of my digital sound.
Since I own very few records, I am uncertain as to whether or not I will upgrade the entire analog system in the future. However, I really like the semi-automatic function of my Dual turntable.
Although cost is not a major concern, I am not looking to spend a lot of money at this time.
Thank you in advance for any suggestions you may have other then ditching the entire analog system and starting all over again(just kidding).
I realize that trying to compare my analog equipment to my digital equipment is totally unfair. However, I was wondering if I could improve my analog sound by replacing my current cartridge and if so what cartridge would you recommend for my 604 turntable? I realize that unless I spend a lot more money, it is unlikely to equal the quality of my digital sound.
Since I own very few records, I am uncertain as to whether or not I will upgrade the entire analog system in the future. However, I really like the semi-automatic function of my Dual turntable.
Although cost is not a major concern, I am not looking to spend a lot of money at this time.
Thank you in advance for any suggestions you may have other then ditching the entire analog system and starting all over again(just kidding).
Showing 4 responses by atmasphere
i don’t understand why it doesn’t sound better unless it is not set up correctly or the needle is worn out. I probably will need someone with more expertise in turntable setup to take a look at this and give me an idea of what my next step should be.@hemoncdoc The suspension of the cantilever on any cartridge can perish after only a few years. This really screws up the sound!! I would just replace the cartridge- it will get a lot smoother, the bass will be better and it will track better. Get a protractor so the alignment can be set up right, but the bottom line is the cartridge in its present state won't do the job. |
I realize that trying to compare my analog equipment to my digital equipment is totally unfair.No- it isn’t. Typically LPs have more bandwidth than digital- going up to 35KHz is no problem for most cartridges and the LP mastering machines go up well past that. I would try a Grado Gold- nice cartridge, works well in a lot of older arms like that. If this is an idler machine, you can get the idler from Russell Industries on the east coast. http://russellind.com/ |