2. analog
  3. 1359313070

Good cartridge for the VPI Classic 1 turntable.

Hi. I am about to pull the trigger on the VPI Classic (1) turntable. Two questions -- 1) which MC cartridge works well? As for a MM I understand that the Clearaudio Maestro (wood) performs well. Your thoughts? 2) my budget for a phono preamp is about $700.00. What would be a good match. I like to listen to Steely Dan (AJA), the Beatles, Holly Cole, Louis Armstrong, etc. I'm not into classical music. I have a Primaluna Dialogue II with NOS tubes, Sonus Faber Cremona Auditor speakers with Kimber Kable Monicle X spkr wires. My other choice is to buy the Clearaudio Concept table with their Maestro (wood) MM cartridge. Is the Project Tube Box II phono preamp a good match for either of these fine tables? Thank you for your comments and insight. Cal.
128x128dramapsycho
12 responses Add your response
macster
64 posts
 
Good advice, get a Jico SAS stylus and you'll have an amazing cartridge for the money. I had one on my Classic 1 and will be installing the same arm cartridge combination on my Aries 3.

M~
chipcarterdc
22 posts
 
I have the Phonomena 2 with my VPI Classic 1 and Ortofon 2M Black cartridge. Sounds great!
goatwuss
877 posts
 
The Phonomena 2 sounds quite a bit better than the GCPH in my experience. GCPH was a bit bright & thin for me.
tswisla
176 posts
 
I second the GCPH, excellent for the price. I just sold mine for $475 and it was in mint condition. As far as the cart goes, I am finishing the setup for a Classic 3 arm on my Scoutmaster II tonight. I will be using a Shelter 501, I will let you know how it sounds. I had a lot of problems with the Shelter on the JMW 9 Signature...
last_lemming
629 posts
 
Dynavector 20xL cart with a Dynavector P75 mkI or mkII phono pre (used?) set to phono enhancement setting.

If you can stretch get the 20x2L
andyprice44
133 posts
 
I would like to recommend the soundsmith line of cartridges. They are well worth a look. I used a soundsmith Boheme on my classic with great results. Others have been very happy with the Zephyr which was designed for the JMW uni-pivots. Give them a look.
wynnosu's avatar
wynnosu
23 posts
 
I have been using the low output version of the Benz Micro Gullwing and have been very impressed as the hours have begun to add up. It is getting sweeter all the time and is very revealing, fast and interfaces well with my other components.
pcs
109 posts
 
Dramapyshco, I have a VPI/Dynavector 20xl cartridge as my back up. It is made for this tt/arm combo. Very good, very reasonable. For my system I went to the Soundsmith VPI cartridge which mates with my taste a bit better. If interested in my vpi/dyna, let me know.

Paul
buconero117
2,311 posts
 
Be daring. Try a Shure 97. I know, I know, a low cost cartridge sounds like a 'cost' mismatch to the Classic. The beauty of first using the '97' is that you get to practice set up, in real time. If the sound disappoints, you can always use it as a backup unit. The 97 is very friendly to all phono stages so it is ideal in getting started.
bpoletti
1,525 posts
 
The AT OC9/IIML is an excellent performer on the Classic 1.
manitunc
795 posts
 
I would recommend the PS Audio GCPH if I was buying new in that budget range. The wonderful thing about the GCPH is its easy adjustment to match any cartridge and gain requirement, as well as its remote control gain, phase and mono. You can even use it alone, without an intermediate preamp, straight into your amp.

Used, I would get a SimAudio LP5.3. Wonderful sound and you can usually find used for around 750.
jmcgrogan2's avatar
jmcgrogan2
6,346 posts
 
Many VPI owners recommend Dynavectors or Lyra cartridges.

For $700 you are not going to get much of a phono stage, if you're lucky you may find an old Threshold or Forte phono preamp. Personally, I feel that if you are looking to spend less than $1K on a phono stage, you're better off looking for a full function preamp. A $500 inboard phono stage will outperform most any $1000 outboard phono stage.

I see that you can add a phono board to your Primaluna for $200. That's probably your best bet until you get setup and running. Then later on when you have more money you can upgrade your phono/preamp/amp.
Log in to respond
More to discover
80x80
Kuzma Stabi R
80x80
Oracle Audio Technologies Delphi MkIV
80x80
ZYX UNIverse ii Welcoming
Astro to the family