Anthony Gallo auditioned some prototype stands and approved 8" tall stands.
You can also raise the soundtage by adjusting the spikes.
I hope this helps
You can also raise the soundtage by adjusting the spikes.
I hope this helps
Gallo Reference 3.x Stands...
There has been some discussion of this topic in a few unrelated threads, so I figured it deserved it's own.
I had tried concrete blocks from The Home Depot with moderate improvement. First I used 1 block roughly 8"x15"x3.5" laying flat, I then used two on edge, to bring the lift to 8". I'm in the process of implementing my own custom solution, built from 3/4" MDF. Details to follow.
Please post your solutions and what changes they brought to your system here, so that there can be a complete reference in one place for all to learn from.
I had tried concrete blocks from The Home Depot with moderate improvement. First I used 1 block roughly 8"x15"x3.5" laying flat, I then used two on edge, to bring the lift to 8". I'm in the process of implementing my own custom solution, built from 3/4" MDF. Details to follow.
Please post your solutions and what changes they brought to your system here, so that there can be a complete reference in one place for all to learn from.