Fozgometer?

I used the Cardas lp it has 1K L and R tones i believe tracks 9 10 and 11

I used a Fluke DDM today to check Azimuth on my rig. I used a 1k left and right signal through my EAR 834p to the DDM. I had the DDM set to millivolts. I had the adjustment close by using the human ear method. I was off by a slight amount and set Azimuth to equal amounts of millivolts on the quiet channel. I do believe i m getting a wider stage and better sound now. From what i ve read it may have been easier to do this adjustment with a Fozgometer but it can be done with a DDM also.

Hey Restock, i checked out your Ispectrometer for mac and the frequency filters like the 1k needed look easy to apply. I use a windows based notebook and did a extensive google search and could not come up with a meter that i could understand or use. Zelscope and Oscllometer seemed good for this adjustment but i could not get them setup for a good reading, the Ispectrometer you used seems cut and dry for adjustments like this.

Using a DVM with the millivolt setting instead of the standard voltage setting made a big difference in the meters range. With standard voltage setting the range was all over the place with millivolt setting the range was steady for a good adjustment. And the sound i m getting proves it. Better than my brain/ear method of adjusting azimuth i must say.