Focal 27WX 11" Subwoofer Application


Hi there I have 2 Focal 27wx's I am currently using in my car, I have asked this before and all I have heard back is that car audio is garbage, which is true of all but the High High end.

It is a Utopia Subwoofer of the same design and build in there utopia line.

What I am curious which I cant find anywhere, Is how does it differ for the home version of the driver

Is it designed to work with cabin gain?

Does it have the same resonant frequencies?

I know its good to any extremely high Cutoff i think 1.5K if memory serves. Any way Its not an SPL Sub it has 0.24" Xmax and I think less than 100 grams of MMS. But running in stereo their extremely musical.

Thanks a million Toby
128x128systembuilder

Showing 1 response by systembuilder

I would agree with you mostly, The only thing here is that my subs are literally designed purely for low output quality, My old Velodyne ULD-15 would probably knock harder.

My subs are rated at a mere 250 watts and are the fastest most musical subs I have still heard to date. What I am trying to figure out is if they can integrate well with a pair of main speakers.

Most car audio is for volume yes. NOT ALL CAR AUDIO IS DESIGNED TO BE BLASTED AT RIDICULOUS LEVELS. Some car amps are pretty great, The older Mcintosh amps from the 90's, The old school PPI, Zapco, Esoteric Audio, Morel, Dynaudio and even Focal are examples.

I have found some stats on the current 13WX Utopia for home use 13" Sub and My 11" 27WX. I noticed my sub takes 75 watts more power but I also am not certain the current driver is the same as in the late 90's

My 11" 27WX Car Subs

27cm (11") subwoofer for bass reflex enclosure.
65mm (2-1/2") v.coil
multi-magnet 12x60mm (12x2-3/8").
Max. power handling: 500W.
Nominal, power handling: 250W.
Sensitivity (2.8 V/1m): 90dB.
Frequency response: 25Hz*-1.5kHz.
Fs (Hz) 37.4
Re (ohms) 4.4
Qes 0.6
Qms 7.4
Qts 0.56
Dia (cm) 21
Mms (g) 79.1
Lvc (mH) 2.12
Hbob (mm) 26
Hgap (mm) 8
Xmax (mm) 9
Sd (cm2) 346.6
Vas (I) 38.6
BL (N/A) 11.7
Folding dia. 233
Mounting depth (mm) 119

Sealed enclosure (I.) 30-50

Bass reflex enclosure (I.) 30-50

And the 13" 13WX Home Sub

Nominal power handling (W) 175
Max. Power Handling (W) 300
Sensitivity (db, 2, 8 V/1m) 89,9
Cone W®
Surround rubber
Nominal Impedance (ohms) 6
DC resistance 6,25
VC diameter (mm) 77 11,94 in
VC height (mm) 22 0,87 in
Former aluminium
Layers 1
Wire copper
Inductance (mH) 2,15
Xmax (mm) 6,0 0,24 in
Magnet diameter x height 12 x (72 x 15) 12 x (0,47 x 2,83) in
Magnet weight (g) 233 x12 -
Flux density (T) 1
Gap height (mm) 10 0,39 in
Net weight (Kg) 13,7 30,19 lb
Parameters
Fs 33,6
Vas 89,0 5431,1 in3
Qts 0,37
Qes 0,42
Qms 2,83
Re 6,25
Sd 551,5 85,5 in2
Cas 634E-09
Mas 35,5
Ras 2645,7
Cms 0208E-6
Mms 108,05 0,238 lb
Rms 8,05
Ces 318,8
Les 70,6
Res 42,1
Bl 18,41
SPL 90,9
Simulation
Vented

Vented
V(I) 80 100
Fb (Hz) 39,1 35,7
F-3 (Hz) 37,6 33
Qui 7 7

Thanks a million Toby