Flat screen between speakers, again.


I know this has been discussed before, but after reading most of the somewhat recent responses to similar questions I still need to pick your collective brains.
To mitigate the TV's impact, I am considering building a panel that would cover the TV when it's not in use. The panel would be a 2.5' x 4.5' diffuser or absorber. Ideally it will hang above the TV when I am watching TV and would lower down to block the TV when I am listening to music.

My question is whether this is a viable solution and, if it is, would I be better served with diffusion or absorption?


128x128tony1954

Showing 2 responses by twoleftears

The other place I tried the GIK panels was perpendicular to the wall behind the TV (and hence also to the TV itself), with one side edge of the panel touching the wall, and snugged as close to the edges of the TV as possible.  This was more effective than panels sitting directly in front of screen and nearly as effective as 45 degree positioning described above.
I have a pair of the GIK free-standing panels, 4' x 2'.  This allows you to experiment with placement.  I started off with the pair cosied together directly in front of the screen and as close to it as possible.  But I ended up with them separated, at 45 degrees to screen, half way between two side edges of screen and back corners of speakers.  Moral of the story: the most obvious place for acoustic treatment may not be the most effective.