Few problems on "new" tt


I just bought a Sansui sr-222 turn table, and, of course, there are a few problems... I just hope you guys can help me out.

First, it sounds awful... I gues the cartridge is'nt in to good a shape, but I could'nt tell (because I know nothing about turntables). It sounds "heavy" : the bass is kind of deap... The cartridge is a ltd-250 (?). I did not find any information on the setup (weight) it requires. If anyboby as any idea.
I will soon buy a knew one, but if I could have working meanwhile...

Second : it grinds. The belt seems to rub on its guide (speed selector). I tried to chang the adjustment, but it also changed the speed. So I set the speed again, and its noisy again. I tought about trying a silk wire.

Also : the motor shaft is spring loaded (I did not know that :-) ), The belt pulls on it when I start the tt, but on the short (and less restricive)side of its float, causing the shaft to rub on the rake (speed selector) and the belt to move on it. Could it be mounted with the float pointing in the wrong way?

I know these are pretty technical questions, and not fun to anwer at all. If you could help me, though, I would be glad to get to know how this thing works.
remi

Showing 1 response by rar1

Remi:

The Sanusi SR 222 is a 70's era turntable, that was considered a fairly decent budget turntable (below $200) in its day. After 25 or so years, it probably needs a good overhaul by a knowledgeable repairman ... which is where you are heading, given your inexperience with turntables. I would imagine that your Sansui requires cleaning, lubrication, belt and cartridge replacement, a whole myriad of adjustments; etc. You paid $60 for the turntable ... you are probably talking an additional $150 to $200 for a professional overhaul and a new cartridge. My guess is that you may be better off with something like a Technics SL-BD22 for $225, brand new with a new cartridge. Buying vintage equipment can be a bit of a crapshoot, because outside appearances don't always match up with the true component conditions.

Regards, Rich