fabulous Technics EPC-100 series re-tip

I'm pretty sure many of you guys own fabulous Technics MM EPC-100 (MM) in your rasenal, especially their top models like (P or C versions) MK3 and MK4.

The question is how to upgrade this cartridges with a new tip, cantilever, suspension:

-How can do the job properly and how much is it, how is the sound after upgrade compared to the original?

-How good is the motor of this cartridge?

-It's worth to invest more in new boron cantilever, new tip etc?

-No one can provide pressure fitted tip to the boron cantilever?

P.S. I know Axel can do the job, not sure if he can change the suspension, Soundsmith will not do that. VdH is not available in my area. Who else can treat that Technics MM right ?

Anyone on here did the same to their Technics EPC-100 mk3 or mk4 ?
A friend of mine had an Ortofon Rohmann retipped by the new Garrott Bros. recently after accidentally dropping the cartridge. They fitted a microscanner tip ( nearest to the original ortofon profile ) and the results were excellent. To my ears sounded better than the original which was only 18months old.
Is the cantilever broken? Does it have a collapsed suspension, or just need a new stylus?

I doubt if anyone can replace the original tapered boron tube cantilever with an equivalent. They are generally unavailable, so if that's intact, I suggest you get a new needle only.

On the MM/MI thread there's a link to a photo of a Technics boron tube/stylus. J Carr said the stylus was too tall - extended out too far and would tend to rotate. You might want to discuss this w/re-tipper.
No, Fleib
In the same thread i've mentioned my small bunch of technics cartridges: few samples of 205cmk3, at least 4 samples of 205cmk4 and one 100cmk3 later. All in good shape, but i realized the difference due suspension condition. One of the 205cmk4 was simply amazing like new, but i sold all of them, cos my one and only 100cmk3 was better (especially in bass register, also better soundstage). I still have this cartridge and it's still beat all other MMs i have tried.

But this month i realized it's retipped 100cmk3, probably too late! The plastic boby of 100ED3 stylus is the original, cantilever is original boron, but the tip is glued (not laser etched) and on the bottom the cantilever is telescopic (not like the original). Thanks to one of the fellow technics collector from audiogon who emailed me some nice high resolution images of technics original tip/cantilever made under his microscope.

When i bought this cartridge many years ago i have noticed a problem with suspension and decided to sent it back to seller to fix it. It was foxtan btw. It took a long time, but his vendor have fixed the damper/suspension and i received perfectly working cartridge, sound was just great (better then the original top condition 205cmk4). I have been using this cartridge from time to time and later decided to sell it, but i never noticed the glued tip, i thought it was just a damper problem fixed. I also thought that mk3 version might be different from mk2 or mk4, but now i know they are all looks the same (thanks to the fellow collector who provided me images of different samles).

Seller never mentioned anything about re-tip, he told me the vendor just fixed suspension, he also told me he paid a lot for his work. I've bought many cartridges and not only cartridges from foxtan, never had any issues. But still i feel not so good about this particular 100cmk3.

At the same time Raul and other always fixed their technics with VdH or other retippers. The original tip is just an elliptical, but today we can use a better profile. And finally this sample of 100cmk3 sounds great and works perfect. The only problem i don't know which tip i have now, who does the job and maybe someone can do it better. Also to sell the cartridge i have to know everything about it to be honest with buyer.

Since it sounds so good maybe you could send it to someone for evaluation - look at the tip, tell you what it is and amount of wear. Seems like they did a good job on the suspension and cantilever repair, and someone with skill and an experienced eye can evaluate the situation and give you options. The question is who?

You can't go to VdH? Last I read Axel is backed up for a long time. Maybe you should check. I don't know who else in Europe. I have a Genesis 1000, also w/boron tube cantilever and Soundsmith replaced the tip with a micro. He wouldn't replace the cantilever as long as it was functional.
I believe he will give you an evaluation for a nominal fee. A tip replacement (micro) on an existing cantilever is $450, but if you request an evaluation he will discuss it with you first.

Other than that, maybe Garrott? I strongly suggest not replacing the cantilever if at all possible.

I think VdH is the most expensive option and impossible to contact directly. SoundSmith service can take too much time. Still waiting for Axel's reply, almost one week with no luck.

Some other options:

Dominic @ http://www.northwestanalogue.com/cartridge-repairs.html

Expert Stylus: