I am a proven proponent of cable and power upgrades across-the-board as they certainly make a difference. The better the quality of the system the more it’s impacted, of course. I ran a 20 foot section of supra 8 directly from the router to my streamer/dac, unfortunately I did not have a large perception of improvement over the in wall ethernet cabeling, but the Supra will serve as a good quality cable from the router to the last couple feet where I plan to upgrade to a better patch cord. Probably something in the wireworld or audio quest line. To be determined.
I should add my experience may be biased based on my streamer dac being a Macintosh MB 50 which requires a $15 dongle to use to connect an ethernet cable instead of using Wi-Fi. That could be choking on the Internet signal itself but I’m moving out of the mb50 into a lumin s1, so may see different results.
Blue Jeans Cable assembles Cat 5e, 6 and 6a using Belden cable to the length you need but more importantly, each cable is individually tested using a Fluke meter to ensure it meets spec and you receive the report. MeiCord Opal UTP Cat 6 as also garnered great reviews. Or Ghent Audio, who assembles Cat 6a using Belden stock with Metz shielded plugs, perhaps worth a look.
Just use the same cables that are used in the server farms of Spotify, Amazon, Itrax and the like to transport their digitized audio around their server farms and by all of the NSPs, NAPs, ISPs to then send it to your modem. These are mostly generic cables made in-house, Can you imagine how much music would cost if they all had to pay more than a few dollars for each of their housands of millions of ethernet cables.?
Just got the Supra ethernet cable that some of you recommended. Excellent sound and picture right out of the box, we'll see how it goes after 100-200 hours.
denialwade123"All Ethernet cables serve the same basic purpose — to connect devices to networks, like the internet."
Wow, that is amazing thank you for sharing this eye opening information so you are saying all ethernet cables do this every single, solitary ethernet cable ever made by every manufacturer in every factory in every country was specifically intended, designed and manufactured for this purpose? Please tell us more were they also designed for other purposes such as use as an AC cable, transatlantic cable, fiber optic cable, or speaker cable you sound like a qualified, informed, educated expert so please tell us!
All Ethernet cables serve the same basic purpose — to connect devices to networks, like the internet. Not all Ethernet cables are exactly the same, however. If you’ve ever found yourself in need of an Ethernet cable without any idea of which one you should pick, you’re not alone. Ethernet designations, like many things in modern networking standards, can be difficult to interpret and understand. Luckily, you’ve come to the right place. Keep reading to find out which cable is right for you and your situation. mysubwaycardmygiftcardsitemcdvoicetutuapp
Since a few weeks I use the Revelation Audio Labs CryoSilver Reference CAT8+/RJ-45 i2s Ethernet cable between my North Star Design cd transport and NSD extremo dac. It beats every ethernet cable I used before. A perfect match. I used the cat 5 of Revelation audio before. It gog broke because of thd cheap connectors after a few years. I tried several other cables. From cheap to expsive but it didn't work out well. I great soundstage and 3 dimensional experience didn't got back. It was very frustrating. Even tried a used White Gold of North Star. At the and I bought the new Revelation Audiolabs Cryo Silver Reference Cat 8 Ethernet cable. Good Price as compensation for the old broken one, good communication and fast delivery. The sound is incredible even when it will take some time more for totaly break inn. I am very happy.
Just replaced Supra with AQ Diamond from wall to DAC and improvements in ALL parameters. AD Diamond is expensive but well worth it.
I encourage you to 'treat' your router as you would any major audio
component. In other words, apply proper isolation and make use of an
upgraded power supply and power (DC) cable. This WILL enhance system
performance as well.
Agree! Sbooster LPS improved my Verizon Fios router performance.
@david_ten Thanks! I may give the Wireworld Starlight CAT8 a try first. It seems to be a popular cable for the Aurender owners. In my experience, I've learned that every single cable makes a difference, so I can see that ethernet cable matters too even though I struggle to comprehend.
I encourage you to 'treat' your router as you would any major audio component. In other words, apply proper isolation and make use of an upgraded power supply and power (DC) cable. This WILL enhance system performance as well.
@respected_ent Congratulations on adding Tidal and streaming music to your repertoire!
LAN cables will make a difference and should provide you with better sound quality. And yes, there are sonic differences and performance levels between LAN cables.
I just got into streaming Tidal music with my Aurender music server. I have to say the Tidal music quality is very good. Much better than Spotify. But when I compare the same songs between the WAV files stored in the unit and Tidal, I can still hear some minor differences. The WAV files still sound better than streaming. So, the question is, would the Tidal music sound as good if I upgrade the ethernet cable (between the Aurender and the router)? I am currently using the generic ethernet cable that comes with the router. Thanks.
An Ethernet cable is one of the most common forms of network cable used on wired networks. Ethernet cables connect devices within a local area network, like PCs, routers, and switches. https://mcdvoice.me/
Just installed 3 runs of Supra CAT8 in place of Terra CAT7. The music is noticeably more alive with no loss of body and soul. I almost never hear an undeniable improvement with cable changes. Not a component level upgrade improvement for sure; nonetheless, it justifies the cost of the Supras.
I agree, Supra is a fabulous sounding cable and an excellent value. The Oyaide IS-707 RJ Cable was good but once you hear Supra, there is no way you can go back to IS-707.
I replaced all AQs with
Supra CAT8
and after 50+ hours, system sounds excellent. Everything is system dependent and
Supra CAT8
just works very well in my system.
Difference is obvious and don't need struggle to hear the improvements.
In my system
Supra CAT8 is the BIG WINNER!!!
Oyaide IS-707 RJ
sounds similar to AQ.
Supra
is more dynamic, images jumping out of blacker background ...
I have received my Oyaide IS-707 RJ Cable today. Right off the bat, nice build quality, flexible and high quality locking connectors seen only on uber-expensive cables. I will allow burn-in time between now and the weekend before I sit down for some critical listening / camparison.
@joecasey Great to hear! Glad you are happy with the results. I use the Supra CAT8 for my peripheral connections. Looking forward to your head-to-head impressions with the Oyaide cable.
Ethernet cables do not have a sonic signature as Jinjuku here demonstrated:
Jinjuku
made a claim in that thread, not a demonstration. There are no details on how the test was conducted, no one monitored the process and the sample size wasn't stated but for the instance where it was just one person. So it appears this matter remains unresolved.
Supra CAT 8
arrived yesterday placing order just 3 days ago. It's much much quieter than AQ flushing out more details and resolution. Superior cohesion and 3D with well defined images. ~5 hours on it so far. Very happy with purchase.
Oyaide
is shipping from Japan scheduled to arrive mid March. So far so good :-)
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
