Duelund conversion to DIY Helix Geometry Cabling

I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!

Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.

That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )

After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…

I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.

You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…









Whilst reading another Threads Post on this forum, I discovered the following that has a range of Connectors.

I have carried out many searches for Copper RCA and XLR Connectors and this site is a new discovery.

I hope it helps with a plan another may be putting in place.

 bocchino audio retail products access index

Williewonka@ what’s the influence of sound by the twisted neutral and ground”does a tighter twist over the live wires increase focus, air or timber of the ac cable.



When the System is reassembled, the intension is to be using this design of  Cable.

In the interim, I am having a few changes put in place.

The Power Amp's are to being returned to the Designer/Builder to be converted to work as Balanced and Single End.

Another EE Friend is now commenced with building a Balanced/Single End design of Pass Korg Nutube B1 Design Pre-Amp is being produced.  

The Power Amp' EE has asked for all devices to be in use, to be made available for the final testing to take place, as well as be supplied XLR Cables that can have a Earth Shield detached at One Connector.

The query is, does the Helix Design lend itself to this request from the EE.

I was not quite onboard with the EE's inquiry, when questioning me about the Cables to be built, I am interested in meeting the request from the EE, and to have a Cable available with this as a option, which will be able to have a shield detached.