Does anyone care to ask an amplifier designer a technical question? My door is open.


I closed the cable and fuse thread because the trolls were making a mess of things. I hope they dont find me here.

I design Tube and Solid State power amps and preamps for Music Reference. I have a degree in Electrical Engineering, have trained my ears keenly to hear frequency response differences, distortion and pretty good at guessing SPL. Ive spent 40 years doing that as a tech, store owner, and designer.
.
Perhaps someone would like to ask a question about how one designs a successfull amplifier? What determines damping factor and what damping factor does besides damping the woofer. There is an entirely different, I feel better way to look at damping and call it Regulation , which is 1/damping.

I like to tell true stories of my experience with others in this industry.

I have started a school which you can visit at http://berkeleyhifischool.com/ There you can see some of my presentations.

On YouTube go to the Music Reference channel to see how to design and build your own tube linestage. The series has over 200,000 views. You have to hit the video tab to see all.

I am not here to advertise for MR. Soon I will be making and posting more videos on YouTube. I don’t make any money off the videos, I just want to share knowledge and I hope others will share knowledge. Asking a good question is actually a display of your knowledge because you know enough to formulate a decent question.

Starting in January I plan to make these videos and post them on the HiFi school site and hosted on a new YouTube channel belonging to the school.


128x128ramtubes

Showing 2 responses by gnaudio

I spent close to $20k on a pair of brand name monoblocks, plugged them into my dedicated 20 amp outlets and they had a loud line level hum, hired electricians, changed out grounding rods etc to the tune of $3k in costs. Took all my other equipment and cables to my dealer to make sure they weren’t the issue and they weren’t. Finally I paid $10k and bought a used amplifier and bingo the problem went away. My system is silent and absolutely glorious sounding again. The monoblocks worked at my dealer without issue but had an issue in my house. How can a designer build a product like this and what could the problem be. I am out 000’s of dollars and lots of my own time researching the issues. I borrowed isolation transformers etc as the manufacturer said it was my house that was the problem and not their amps... they were a joke to deal with and basically blew me off. The only thing they offered was to pass a name along to me if they heard of anyone wanting to buy a pair. FYI, this company has a 20 year warranty... your thoughts are appreciated. Thank you for listening to my rant...
Thank you Roger. Had many techs look at my issue. Isolation transformer had a 3 prong plug. It was a Torus unit. I ran the system single ended and balanced, floated the ground on all and only some units and used a structured process of elimination, had them all connected to one Shunyata power bar therefore only one outlet used, connected them to a complete different circuit in the house etc. Interestingly, the hum sounded different than a ground loop, it was loud as in you could hear it 30 feet away. Like the noise when you plug an RCA cable into a powered up subwoofer. A loud buzz. My new amplifier is a stereo unit. When I connected the monoblock amplifiers to the speakers and powered them up they were silent, when I plugged a balanced or RCA cable to either one the hum/buzz started even if the preamp was off! Never have a had this problem in 30 years of high end audio.... the only thing that made me post here was how the VP of this company spoke down to me when I explained my issue... never will I buy from them again.