Juke box.
Do you have ways to ease use of vinyl?
The reason for this post is to help some of the older guys here who recently said they gave up on vinyl because of its physical challenges. And at 66, I could not agree more. I used to have a two shelves rack for my turntable, which placed the top of the platter above knee height, at 25". To flip vinyl was either bend over and hurt my back, or doing it and one knee and hurt those.
Well, NO MORE.
Late last year I purchased a 4 shelves rack which puts the top of the platter at my belly button height, 40". Btw, I am of average height, 5'10".
What a difference! My back and knees will be forever thankful.
Here is another thing that greatly eased my vinyl experience.
I use an outer ring, center weight and brush my vinyl for each play. This was the process it entailed: Put on the center weight before brushing because I play my vinyl on a bare aluminum platter. Wait until the brushing was done before putting on the outer ring because I brushed the conventional way, finishing by dragging the brush outward to get rid of the dust. Once brushed, removed the center weight so I could install the outer ring and then reinstall the center weight and I finally could drop the needle. Ouf!
NO MORE!
Now I put on the outer ring first, then brush the record taking the brush INWARD instead, leaving the minute dust on the label (and I found out it does a much better job of brushing since the brush moves in the direction of the grooves, inward). Once brushed, simply put on the center weight and drop the needle. Voila!
Easier ten fold.
Another important pointer, the center weight, brush AND OUTER RING must be near the TT and at the SAME HEIGHT. Your back will thank you.
Those changes took me over 50 years to figure out and they have literally made my listening to vinyl experience a dream instead of dreading to flip those vinyl.
Please share any tip you may have to ease up the physical burden that some older folks here may have about using vinyl. Thanks.
Well, NO MORE.
Late last year I purchased a 4 shelves rack which puts the top of the platter at my belly button height, 40". Btw, I am of average height, 5'10".
What a difference! My back and knees will be forever thankful.
Here is another thing that greatly eased my vinyl experience.
I use an outer ring, center weight and brush my vinyl for each play. This was the process it entailed: Put on the center weight before brushing because I play my vinyl on a bare aluminum platter. Wait until the brushing was done before putting on the outer ring because I brushed the conventional way, finishing by dragging the brush outward to get rid of the dust. Once brushed, removed the center weight so I could install the outer ring and then reinstall the center weight and I finally could drop the needle. Ouf!
NO MORE!
Now I put on the outer ring first, then brush the record taking the brush INWARD instead, leaving the minute dust on the label (and I found out it does a much better job of brushing since the brush moves in the direction of the grooves, inward). Once brushed, simply put on the center weight and drop the needle. Voila!
Easier ten fold.
Another important pointer, the center weight, brush AND OUTER RING must be near the TT and at the SAME HEIGHT. Your back will thank you.
Those changes took me over 50 years to figure out and they have literally made my listening to vinyl experience a dream instead of dreading to flip those vinyl.
Please share any tip you may have to ease up the physical burden that some older folks here may have about using vinyl. Thanks.