2. cables
  3. 127475-89724

Diy interconnects RCA connectors.

I've made some pretty good sounding interconnects using Furutech FP126g RCA connectors. I'm wondering if anyone has experience with KLE harmony RCA connectors,or other higher quality ones under $100. a set.
I just ordered the entry level KLE Copper Harmony rca connectors and will be building a cable using them. I suspect they will sound very different from the Furutech FP126g.
I'm also wondering if anyone has experience using different brands of pure silver,solid core,wire. So far I've tested the Jupiter silver in cotton and silk casings,and the Neotech upocc silver in teflon. I believe the Jupiter is more open,and the slight "tizz" or haze isn't there. The Neotech might have produced slightly more midbass/bass presence,but my Emotiva system and Energy RC-70 speakers might not be quite good enough to make a more accurate comparison.

128x128dayemo

Showing 1 response by unfairlane

unfairlane's avatar
unfairlane
140 posts
 
I stumbled over a tv-coax years ago that has shown to be totally inaudible as an ic when used one lenght for + & -. It is the Vivanco KX-710. Tryed it up against a lot of top-ic`s, nothing comes really Close. A bit tricky to terminate, I prefer to use wbt- type rca`s and solder the minus through(!) the rear screw-hole in the plug.

This coax has also shown to be the ultimate digital coax. Wonder if Vivanco weill ever realise what they have done here.

I have seen a grown divorced* audiophile cry after hearing his system play through these wires. 

*real audiophiles are divorced or just single
More to discover