Directv booster or amplifier


Anyone have any experience with these? I've got close to 90 ft of cable from my dish to a splitter and then another 30 ft to my receiver to my Pioneer Elite. Got a great pic but sometimes I get some posterization or shadowing. I'm wondering if I need a booster to boost the signal, any help will be greatly appreciated.
pops
Hello,

A booster most likely is not necessary. Make sure that you are using quad0shielded RG-6 coax, and that you have aimed your dish properly. Up to 100 feet, you will be fine.
I don't think an amp is going to help. DirecTV is a digital signal, and you should either get it or not. There should be no shadowing or fading because those are analog concepts that should not be applicable to your signal. When your signal degrades it should jump in an out, you should lose the whole thing. An 80 signal strength is the strength at your box, not on the antenna, so you should be fine. I think the problem is in your tv or in the cable from your box to the pioneer to the tv. Of course you could prove me wrong by getting better results with an amp but I doubt that you will (but of course those radio shack amps are returnable).
Hi there pops; ....The word is thrifty,ok? Having said that;it is good to know you're in the hi 80s. Guess one of those thrifty-priced amps is next.Before you got the amp;I'd drop off the splitter/put an inline piece and see if that makes it all better; / If it do,then get the signal booster amp. You got the 60 incher?---- Anyway, because we have the 9 point convergence;no harm in moving the set./ You just reel it back in. Have you tried putting the set on a different wall. It does help.Mine looks better facing north. It's that magnetic field thing......Hope you get this taken care of;inexpensivly.
The hot/inexpensive s-vhs is the 2000; from Wally right here.Good guy to deal with.
Thanks all, avguy I also get in the high 80's which is common around here, i use a monster s video cable, i believe the 1000 or whatever the model number. my only real complaint is the shadowing i get on dark scenes - i've never had the tv calibrated - too cheap it costs about 400 bucks and then your not supposed to move the tv. i can't commit to not ever moving the tv because i'm always switching stuff like cables around.
You can buy an non-powered amplifier at radio shack for ten bucks. They sell plug in models that are more powerful.
Hi,there Pops. ---I'm running the 100 ft to the receiver,then a long s-vhs run to the tv. What does the system signal strength meter say? I get low 90s. I also have Chang & Monster 200 s-vhs cable (4 mt run) Both of these make a "big" difference.
Pops, You need a booster. I don't remember what the brand was I used to install, but after about 100' you really needed a booster-which did a good job. Install it before the splitter-sometimes you can get too strong a signal and then it does weird things to your signal/.