2. tech-talk
  3. 1042220786

Dedicated line question

I asked this question within another thread about the subject of dedicated power lines, but received no response.

I have what is essentially a dedicated line, seeing that the only other things this line serves are an overhead foyer light (incandescent) and two outlets in the garage that are seldom used for anything. Can I somehow get this particular line it's own dedicated ground with a minimum of fuss? What benefit would I receive from installing multiple lines for various components?

I am using ACME cryro outlets, which provided a major upgrade. Where can I go next to optimize my power? I do not use a line conditioner, but have high quality power cords.
128x128wellfed
7 responses Add your response
bikerrr1
2 posts
 
Try a good PLC like Richard Gray or Monster 5000 that has isolated supplies for each input and filters any crosstalk.
dennislowe
24 posts
 
With more dedicated lines you'll hear a blacker background, less noise and more detail. Make sure to avoid ground loops though.
subaruguru
1,362 posts
 
I ran three dedicated lines for my system in 2000: one for digital, one for low-level analog, and one for power amps.
The Belden 83802 all-Teflon, shielded 12AWG is outstanding for this application.
wellfed's avatar
wellfed OP
690 posts
 
Thanks for the responses. I truly appreciate them.
bob_bundus
1,834 posts
 
you do not have a dedicated circuit per Dill's explanation above.
the benefit of separate circuits for different components or different subsections (digital, video, analog, hi-power) is the isolation of them from each other, which helps prevent the radiated noise coming out of a given component (especially digital) from contaminating the others.
Similar or even better isolation effects can be achieved via a line conditioner with separate filtered outlets for each load. Upgrade cords accompanied by line conditioning & a dedicated circuit really add up to an optimum result in my experience. Oh yes, plus the definitive Wattgate 381 AC outlet.
stehno
1,453 posts
 
You really should check out this thread for your info and the results.
http://forum.audiogon.com/cgi-bin/fr.pl?htech&1042129752&openusid&zz

And depending on your equipment, as you will see in that thread, the results can be outstanding.

-IMO
dill
2,424 posts
 
A dedicated line, in my system, means a separate circuit breaker and run of Romax (or other cable) to a single duplex wall plug (grounded to the service ground or with it's own ground) with no other junctions. Just having one or more additional plugs or lights disqualifies it from being a dedicated circuit. There can't be any splices.
Log in to respond
More to discover
80x80
Antipodes Audio S30
80x80
perlisten loudspeakers 7st
80x80
Mytek Brooklyn Bridge II Roon Core 2 TB