Damaged Driver

I can't count the number of times I've fixed dented dust caps for a simple repair or a stressed out buddy.. Tape or a vacuum cleaner for the easy ones and a dental pick for the real bad ones. A tiny pic hole, pull out the dents and then a tiny dab of nail polish. If they are torn or destroyed, you can replace just the duct cap..

Yes it requires you cut the old cap off the cone and glue a new one on.. Sounds spooky, it's not. You just act like you've done it before with a firm hand and a sharp single sided razor, razor knife, or a stick craft blade..

I've removed a LOT of dust caps because I add phase plugs to my drivers..

Regards

Capital my good man, capital.. I can get them almost perfect with a sharp dental pick and tape.. You only need a DUST cap to keep debris and dust out and stop the air leak from front to back. Adding a phase plug the cone to phase plug clearance need to be as close as possible without touching.. Again air leaks..

Regards