i am also looking for a new table in the $3000 range. i have auditioned the clearaudio performance se, nottingham spacedeck, and the vpi classic, and the well tempered. i liked the clearaudio best. followed by the nottingham. the clearaudio is very neutral sounding, easy to set up and use, and beautifully built and designed. i really like this table. the nottingham is a very big sounding table and is a little warmer than the clearaudio. its a relly well engineered table, but fit and finish a not as nice as the clearaudio. i could definately live with this table. i personally did not care for the vpi classic. it sounded pretty good, but im not a fan of vpi arms and it is big and ugly in person. the well tempered is a great sounding table, but kinda fussy and i just cant spend $3500 for a table with a tonearm that uses a golfball floating in the dampening fluid. hope this helps.
Choosing a new turntable
I've used an LP-12 for more than 30 years, mostly an 80's version with Valhalla and Ittok. I took it in for a tune-up last week and decided that's it, I'm done with this. I want 45 rpm, I don't want to throw more money at the Linn, I want something different.
My budget is $3K or less for table and arm and my inclination is to buy new, though that's not a hard requirement. My current cartridge is a Benz L2 wood body. I like an organic sound. I want an unfussy system (I briefly had a Kuzma StabiS/StogiS a couple of years ago and never got comfortable with it). I want a table I like the looks of. I've read every relevant thread here. I am intrigued by the groundswell of renewed interest in high-torque systems, but am not sure that will make sense given my budget and needs.
It's tough to audition tables, as you know. I'm hoping some of you seasoned vinylphiles can help me understand the kind of sound to expect from the various choices out there. Here's what's currently on my radar:
VPI Classic -- Price is right, buzz is good (though you have to be careful about that). But the table's footprint is a bit bigger than I'd like and I'm told the VPI sound is on the dark side. It's a bit clunky looking in the pictures. Also, I'm quite inexperienced with unipivot arms.
Clearaudio Performance SE (or the new, lesser, Concept). I like the looks of these tables, they seem well made and easy to set up. I've heard Clearaudio is fussy about support and may be hard to get good sound from for that reason. (I have an Apollo rack with a Neuance shelf.)
Well-Tempered Amadeus. Again, lots of good buzz about this new table. But I have heard of some reliability problems and the thing looks fragile and fussy. Also, no cueing lever (though I understand an add-on will be offered), which would drive me crazy I think.
Technics SL-1200 from KAB with some of the KAB mods. This is an entirely different kettle of fish, I realize. Much less money than the others, would give me a taste of direct drive, very easy to use, and I'd probably take advantage of the detachable headshell to play with some other carts. I could put a better arm in it eventually. But I have no idea if the sound I'll get from this table will be even in the ballpark of the others or even of my sub-optimized LP-12.
I suppose Michell and Nottingham should also be in my consideration set. What do you think?
That's it. And before you start flooding me with suggestions for searching out some long-discontinued rarity or DIY project, let me say that I appreciate the suggestions but I'm really inclined to keep this simple and off-the-shelf.
Thanks.
My budget is $3K or less for table and arm and my inclination is to buy new, though that's not a hard requirement. My current cartridge is a Benz L2 wood body. I like an organic sound. I want an unfussy system (I briefly had a Kuzma StabiS/StogiS a couple of years ago and never got comfortable with it). I want a table I like the looks of. I've read every relevant thread here. I am intrigued by the groundswell of renewed interest in high-torque systems, but am not sure that will make sense given my budget and needs.
It's tough to audition tables, as you know. I'm hoping some of you seasoned vinylphiles can help me understand the kind of sound to expect from the various choices out there. Here's what's currently on my radar:
VPI Classic -- Price is right, buzz is good (though you have to be careful about that). But the table's footprint is a bit bigger than I'd like and I'm told the VPI sound is on the dark side. It's a bit clunky looking in the pictures. Also, I'm quite inexperienced with unipivot arms.
Clearaudio Performance SE (or the new, lesser, Concept). I like the looks of these tables, they seem well made and easy to set up. I've heard Clearaudio is fussy about support and may be hard to get good sound from for that reason. (I have an Apollo rack with a Neuance shelf.)
Well-Tempered Amadeus. Again, lots of good buzz about this new table. But I have heard of some reliability problems and the thing looks fragile and fussy. Also, no cueing lever (though I understand an add-on will be offered), which would drive me crazy I think.
Technics SL-1200 from KAB with some of the KAB mods. This is an entirely different kettle of fish, I realize. Much less money than the others, would give me a taste of direct drive, very easy to use, and I'd probably take advantage of the detachable headshell to play with some other carts. I could put a better arm in it eventually. But I have no idea if the sound I'll get from this table will be even in the ballpark of the others or even of my sub-optimized LP-12.
I suppose Michell and Nottingham should also be in my consideration set. What do you think?
That's it. And before you start flooding me with suggestions for searching out some long-discontinued rarity or DIY project, let me say that I appreciate the suggestions but I'm really inclined to keep this simple and off-the-shelf.
Thanks.