Sorry to say but by adjusting the VTA to clear the cueing assembly, you may now have a tracking problem. 2mm is a HUGE adjustment of VTA. Unless you've had some major serendipity through this change moving the overall VTA closer to the "ideal" average, your playback will probably be muddy from the lower height. Not super-familiar with the Satisfy, but if arm rest / cue height truly isn't adjustable, the cartridge is an incompatible match. Had a similar compatibility problem with a Dynavector 17D3 and Graham Phantom Supreme - tare weight of the cartridge was too light to obtain correct VTF even though the Graham manual said it was within range. Went with the XX2 Mk II instead and solved it. Good luck & happy listening!
Cartridge Skips Beginning of Record
Greets!
Clearaudio Solution Turntable/Satisfy Tonearm/Denon 103R Cartridge
Thanks to those on A'gon who helped me set up this 'table.
Table set up per instructions and leveled. Cartridge mounted and aligned properly.
This (new to me) setup is done correctly AFAIK, based on thread I started here at A'gon. Now, with no antiskate set at all, the cartridge skips for the first cm of any record. With anti-skate set per manual, the cartridge skips in the first half of the record.
Any thoughts?
GP
Clearaudio Solution Turntable/Satisfy Tonearm/Denon 103R Cartridge
Thanks to those on A'gon who helped me set up this 'table.
Table set up per instructions and leveled. Cartridge mounted and aligned properly.
This (new to me) setup is done correctly AFAIK, based on thread I started here at A'gon. Now, with no antiskate set at all, the cartridge skips for the first cm of any record. With anti-skate set per manual, the cartridge skips in the first half of the record.
Any thoughts?
GP