Capacitors


Hi,

I can replace the bipolar capacitors with other not-polarized with the same technical values?

Thanks!
nic10
Of course, ideally you measure the ESR of each cap before replacing.

You can do this with a DATS unit or using Room EQ Wizard with a custom jig.

The 26 uF in the high pass doesn't make a lot of sense though. Are you sure?
@noromance

Oh, OK, this makes more sense.  The 26 uF is on the mid range.

Be VERY careful replacing the 8uF that is in parallel on the mid. I'd need to do a full analysis, but if that has 2 Ohms or so of ESR, you don't want to remove it.

Best,

E


Hi,

yes, the capacitors 8 and 26uf is on the mid range.

Thanks!