Excess surface noise can be the result of a MM cartridge loaded with too much capacitance. This capacitance interacts with the cart. inductance resulting in a high frequency resonance (see Jim Hagerman's web site). Ultra-sonic noise can excite this resonance and be shifted down in frequency into the audible range. Think of ringing a bell. It's struck with an impulse with a lot of high frequency components, but it rings at it's resonance freq. If you can adjust the capacitance loading, try lowering it. I once had a Clearaudio Arum Beta Wood MM cart. and when I loaded it at the manufactures recommended loading I heard excessive surface noise. When I set my phono stage input to 0 capacitance loading (leaving about 100pF for the cables) the surface noise was much reduced.
Can You Live With Crackling & Popping Noise?
I just got my first turntable, a Rega P5 and not sure whether I'm supposed to be delighted or otherwise. When I put on my first record, there was intermittent popping, hissing and crackling noise at low to moderate volume levels. Having lived with digital for half of my life, I find this to be somewhat annoying. For a while I was feeling disappointed and pondering whether I would end up selling this thing. After a while I thought what the heck, since I had got this thing home I might as well turn up the volume and enjoy the music. I started to crank it up to reasonably high levels and all the hissing, crackling and popping noise began to drown and disappear into the background music. Somehow the annoyance turned to musical bliss, well almost.
My question, especially for those who own high-end turntables, can you live with all the crackling and popping noise? I reckon all these noises will be quite noticeable especially when playing some clean vocals with minimum background music? What actually cause all these noises? Is the noise caused by dust sticking on the surface of the record assuming the record is in good condition? Is there any way these crackling and popping noises can be reduced or eliminated completely by cleaning the records?
The manual states as follows:-
"Don't worry about visible dust on the record surface, this is brushed aside by the stylus and any that collects on the stylus can be easily blown away. In general, record cleaning is overdone and one should not believe all the claims made by record cleaner manufacturers."
Does this mean that cleaning records is pointless? If that is the case how do we get rid of the crackling noise in the event the dust and fine particles are the ones that are causing these noises? Is there any easy solution to clean the records by ourselves?
For any newbie who wants to take the turntable route, I would urge you to reconsider your options particularly if you have minimal tolerance towards popping and crackling noises. Even all my good old cassette collection that ended up in the rubbish bin years ago didn't exhibit all these popping and crackling noises.
If all these noises do not exist in records then analog is really the one to beat.
Thank you for your patience.
My question, especially for those who own high-end turntables, can you live with all the crackling and popping noise? I reckon all these noises will be quite noticeable especially when playing some clean vocals with minimum background music? What actually cause all these noises? Is the noise caused by dust sticking on the surface of the record assuming the record is in good condition? Is there any way these crackling and popping noises can be reduced or eliminated completely by cleaning the records?
The manual states as follows:-
"Don't worry about visible dust on the record surface, this is brushed aside by the stylus and any that collects on the stylus can be easily blown away. In general, record cleaning is overdone and one should not believe all the claims made by record cleaner manufacturers."
Does this mean that cleaning records is pointless? If that is the case how do we get rid of the crackling noise in the event the dust and fine particles are the ones that are causing these noises? Is there any easy solution to clean the records by ourselves?
For any newbie who wants to take the turntable route, I would urge you to reconsider your options particularly if you have minimal tolerance towards popping and crackling noises. Even all my good old cassette collection that ended up in the rubbish bin years ago didn't exhibit all these popping and crackling noises.
If all these noises do not exist in records then analog is really the one to beat.
Thank you for your patience.