So, how valid is your comparison?
Cable shoot-out: FIM against Valhalla
Before I begin with my next summary I would like to explain a few things.
First of all I apologize that my review is lacking a certain sophistication, but I am sure that you must have realized by now, that English is not my mother tongue.
Then I am fully aware, that I have a certain responsibility towards the cable manufacturers also, since these are all hard working people, trying to create an excellent product for their audiophile customers and I can imagine that my reviews could influence certain buying decisions.
All the cables I have received for auditioning are excellent products and even if I find that a cable does not sound optimal in my system when compared to the Valhalla, does not mean that in a different system it will sound a lot better. And please, let us not forget the price of the Valhalla!! This cables 7 times more expensive than most of the cables I review, so doesn’t it deserve to sound a little bit better? But does it mean it is still the superior cable, if you balance the price against the quality of the performance? I am not so sure anymore. It all depends what you are looking for. I personally can live with 10% less performance and save 5 times the money.
My intention was to find the best cables for my system and not the most expensive. I was very curious the see how good the Valhalla would sound in my system and then ventured out to compare certain other brands against the Valhalla. I have never intended to do an absolute cable review, comparing all the cables I have at home against each other and I state also, that I am in no way a professional reviewer or have a top notch system.
This said, I will post another short follow up:
Today I tried the famous FIM cables. I received the bi-wire version and it is a very well build cable also, very thick and pretty stiff. You need to bend the pig-tails a bit in order to make it fit your components, but I find that people have greatly exaggerated that this cable will lift components from the shelf , or break loose from the binding posts. My two Bel Canto Amps are not the heaviest amps in the world, but it took me only 5 minutes per channel to stick the cables to amp and speakers. And I am talking bi-wire here. I cannot see why anybody would have problems with the single wire version, if you bend the pig-tails slightly before installing the spade lugs to the components.
My first impression again was that it does not reach the qualities of the Valhalla in my system. It is a very musical cable, with a detailed sound stage, but the sound is a bit darker, although the bass is less pronounced than compared the Valhalla. It seems that the Valhalla is a pretty lean and very fast cable, the sound of a piano is awesome with the Valhalla, you really can hear the keys “bottom out”, whereas the FIM is heavier sound wise and slower, but maybe a bit more musical than the Valhalla. And I am sure it some systems this could be an advantage for the FIM.
In my system with the Bel Cantos and my Martin Logan Prodigy speakers though, it looks, like a leaner, brighter and faster cable will cater better to my musical taste. Price wise the FIM and Valhalla are pretty close together, the FIM biwire in 8ft. is $4400 whereas it is possible to get 8ft of bi-wired Valhalla for $5000.
So again, I personally tend more towards the Valhalla again, but to me it looks like the FIM has a potential to reach the Valhalla in a different system. That’s why it is so important to audition cables before buying.
After the recent audition, my personal decision would still be the following: (provided I cannot get an excellent deal on used Valhalla): Ensemble speaker cables with Pure Note Epsilon interconnects.
I have a few more cables coming in: Empirical Audio and Virtual Dynamics and I was able to lay my hands on a pair of Siltech Compass Lake interconnects, which are the most expensive interconnects in the world and I am very curious how they will compete against the Valhalla.
I will keep you updated.
First of all I apologize that my review is lacking a certain sophistication, but I am sure that you must have realized by now, that English is not my mother tongue.
Then I am fully aware, that I have a certain responsibility towards the cable manufacturers also, since these are all hard working people, trying to create an excellent product for their audiophile customers and I can imagine that my reviews could influence certain buying decisions.
All the cables I have received for auditioning are excellent products and even if I find that a cable does not sound optimal in my system when compared to the Valhalla, does not mean that in a different system it will sound a lot better. And please, let us not forget the price of the Valhalla!! This cables 7 times more expensive than most of the cables I review, so doesn’t it deserve to sound a little bit better? But does it mean it is still the superior cable, if you balance the price against the quality of the performance? I am not so sure anymore. It all depends what you are looking for. I personally can live with 10% less performance and save 5 times the money.
My intention was to find the best cables for my system and not the most expensive. I was very curious the see how good the Valhalla would sound in my system and then ventured out to compare certain other brands against the Valhalla. I have never intended to do an absolute cable review, comparing all the cables I have at home against each other and I state also, that I am in no way a professional reviewer or have a top notch system.
This said, I will post another short follow up:
Today I tried the famous FIM cables. I received the bi-wire version and it is a very well build cable also, very thick and pretty stiff. You need to bend the pig-tails a bit in order to make it fit your components, but I find that people have greatly exaggerated that this cable will lift components from the shelf , or break loose from the binding posts. My two Bel Canto Amps are not the heaviest amps in the world, but it took me only 5 minutes per channel to stick the cables to amp and speakers. And I am talking bi-wire here. I cannot see why anybody would have problems with the single wire version, if you bend the pig-tails slightly before installing the spade lugs to the components.
My first impression again was that it does not reach the qualities of the Valhalla in my system. It is a very musical cable, with a detailed sound stage, but the sound is a bit darker, although the bass is less pronounced than compared the Valhalla. It seems that the Valhalla is a pretty lean and very fast cable, the sound of a piano is awesome with the Valhalla, you really can hear the keys “bottom out”, whereas the FIM is heavier sound wise and slower, but maybe a bit more musical than the Valhalla. And I am sure it some systems this could be an advantage for the FIM.
In my system with the Bel Cantos and my Martin Logan Prodigy speakers though, it looks, like a leaner, brighter and faster cable will cater better to my musical taste. Price wise the FIM and Valhalla are pretty close together, the FIM biwire in 8ft. is $4400 whereas it is possible to get 8ft of bi-wired Valhalla for $5000.
So again, I personally tend more towards the Valhalla again, but to me it looks like the FIM has a potential to reach the Valhalla in a different system. That’s why it is so important to audition cables before buying.
After the recent audition, my personal decision would still be the following: (provided I cannot get an excellent deal on used Valhalla): Ensemble speaker cables with Pure Note Epsilon interconnects.
I have a few more cables coming in: Empirical Audio and Virtual Dynamics and I was able to lay my hands on a pair of Siltech Compass Lake interconnects, which are the most expensive interconnects in the world and I am very curious how they will compete against the Valhalla.
I will keep you updated.