2. cables
  3. 1247698900

cable burn-in / system burn-in

So many of us just take what we hear as being the gospel truth about equipment. I know I do, a lot of the time, because there is just to much work and cost to prove it. I have to finally agree with the burn-in effect. After several years, and multiple equipment changes, I can say, with out a doubt, equipment and cable burn in makes a very large impact on the sound. I just started my system again after being down for a few months. It has taken about 40hrs of play time before it has started to sound good again. I have a cd that I always play to hear the effect, which I am very familiar with. So it is kind of scientific, and not just arbitrary. So there you have it...
johnhelenjake

Showing 2 responses by notec

notec
407 posts
 
Yeah, curious about 200 hours of cable burn-in on a cooker as opposed to 200 hours of settle-in in a system.

Less amperage in a system Vs. a cooker (Audiodharma) I realize - but it was recently suggested to me to go eight days on a cooker for a pair of spkr cbls (Purist Audio biwire).
notec
407 posts
 
Rodman99999 wrote: As long as my system's cables or electronics (new or reinserted) sound like music at the end of the 200hrs of continuous signal that I generally feed them...

Dave_b wrote: A couple of hundred hours for most cables should do it with a short warm up/settling period after each off/on cycle or re-connection of said cables


200 hours of continuous signal, on a cable cooker is 8.3 days. The Audiodharma Cable Cooker recommends 3 - 4.5 days to burn-in cables. Isn't eight days on a cable cooker too long?
More to discover