Buzzing just won't quit: Can someone please help?


Hello,
First let me thank you for taking the time to read my post. I’ve been trying to get this buzz out of my system that I just can’t lick. It’s really starting to drive me nuts. Here is a spectragraphic image of the sound https://imgur.com/a/xREqG. Here’s a WAV of the sound: https://drive.google.com/open?id=0B_YygM_VDhV9RWlPMEVudjBnb28 

My system:
Bryston BP17 preamp
2x Schiit Vidar poweramps, running in monoblock
Sonus Faber Venere 3.0 speakers.
Velodyne DPS10 sub
Schiit Gungnir MB DAC
Music Hall MMF 2.3 TT
Marantz NR-1604 AVR, w/ Roku, CC, and Blu-ray
Samsung Plasma TV
No cable

Facts:
- All devices are on the same circuit.
- The buzzing comes through on LR channels (powered by Vidars) and powered subwoofer, BUT NOT through the surround sound speakers, which are powered by the AVR.
- Poweramps, preamp, AVR, and TV are all on the same plug (via ATC power conditioning strip)

What I’ve tried:
-I have physically disconnected EVERYTHING except the poweramps and the speakers. Everything was unplugged and disconnected EXCEPT the poweramps to the speakers (Wall > Vidar amp (no input) > Venere speaker). Subwoofer unplugged/disconnected. This made no difference.
- I’ve tried an Ebtech HumX hum eliminators on the amps. Did nothing (though it did wonders for my plasma TV).
- I’ve tried switching around to different wall outlets (though all are on the same circuit).

What I’ve determined so far:
- The problem ISN’T the Schiit poweramps. I know this because I hear the buzz coming through the sub, which has its own power.
- The problem isn’t due to the 10000 devices I have because it occurs even when the entire system is disconnected except amps and speakers (with no input in the amp).

So what can I do? Is there some kind of fancy "power conditioner" thing I can buy? One of those Blue Circle Thingees? If I buy a power conditioner, does it have to have regeneration? Would something like a Panamax M5300-PM or something like that be adequate?

Please help me!
naseltzer

Showing 4 responses by toddverrone

Do you have a different amp you could drop in the system and narrow the problem to the Schiit amps? Also, I know you said you disconnected EVERYTHING, but I just want to be thorough: the amps make the noise even without ANY input cables physically connected to the amps (other than AC), correct?
Have you tried lifting the ground on the amps (using a cheater plug), only as a diagnostic measure?
Can you try using RCAs from pre to amps? Or are they balanced only? Though that shouldn't matter, since you said it happens with the amps having no cables going into them.. 


If you’re in the U.S., it’s against code to install a second separate grounding rod. Also, having a second grounding rod can cause a voltage differential to develop between the two grounds, actually causing a current to flow on the ground wire.. all connections need to be clean, tight and tied into the same ground as the rest of the system.  

I agree on the panel based surge suppressor being a good idea. But they are designed to work with a service entrance suppressor and an outlet suppressor you use at the appliance. Surge suppression is supposed to happen in stages, with each stage taking more of the current out of the surge.

Sorry, not trying to be argumentative. I just did a lot of research into this when I was deciding on what to do. I'm certainly no expert, but those were at least two things I learned in all my reading!