Buzzing just won't quit: Can someone please help?


Hello,
First let me thank you for taking the time to read my post. I’ve been trying to get this buzz out of my system that I just can’t lick. It’s really starting to drive me nuts. Here is a spectragraphic image of the sound https://imgur.com/a/xREqG. Here’s a WAV of the sound: https://drive.google.com/open?id=0B_YygM_VDhV9RWlPMEVudjBnb28 

My system:
Bryston BP17 preamp
2x Schiit Vidar poweramps, running in monoblock
Sonus Faber Venere 3.0 speakers.
Velodyne DPS10 sub
Schiit Gungnir MB DAC
Music Hall MMF 2.3 TT
Marantz NR-1604 AVR, w/ Roku, CC, and Blu-ray
Samsung Plasma TV
No cable

Facts:
- All devices are on the same circuit.
- The buzzing comes through on LR channels (powered by Vidars) and powered subwoofer, BUT NOT through the surround sound speakers, which are powered by the AVR.
- Poweramps, preamp, AVR, and TV are all on the same plug (via ATC power conditioning strip)

What I’ve tried:
-I have physically disconnected EVERYTHING except the poweramps and the speakers. Everything was unplugged and disconnected EXCEPT the poweramps to the speakers (Wall > Vidar amp (no input) > Venere speaker). Subwoofer unplugged/disconnected. This made no difference.
- I’ve tried an Ebtech HumX hum eliminators on the amps. Did nothing (though it did wonders for my plasma TV).
- I’ve tried switching around to different wall outlets (though all are on the same circuit).

What I’ve determined so far:
- The problem ISN’T the Schiit poweramps. I know this because I hear the buzz coming through the sub, which has its own power.
- The problem isn’t due to the 10000 devices I have because it occurs even when the entire system is disconnected except amps and speakers (with no input in the amp).

So what can I do? Is there some kind of fancy "power conditioner" thing I can buy? One of those Blue Circle Thingees? If I buy a power conditioner, does it have to have regeneration? Would something like a Panamax M5300-PM or something like that be adequate?

Please help me!
naseltzer

Showing 1 response by raindance

Do you use proper shielded interconnects, not those silly twisted pair cables with no shield? Have you confirmed that the shield is actually connected - the reason I say this, is I recently had an issue and found one of my interconnects between preamp and power amp had no shield connected on one end.

How loud is the noise?