Geoffgarcia,
I'd say yes, technically speaking you are biamping. There should be no delays in each channel due to surround modes, as you mention. This is not something I would recommend you do. Each power amp channel would be amplifying the whole audio frequency which can tax your power supply and is a waste because your speaker crossover will filter out the signal portion that the individual driver can not produce.
In an optimal bi-amp configuration you would take your line level signal from a preamp output and run it through a crossover that splits the signal into two, low and high frequency. Those would then be fed into individual power amp channels for amplification to speaker level, then fed into the separate low and high frequency speaker connections. This makes your amplifier work less since each channel is only amplifying a portion of the whole signal.
Bi-amping can produce awesome results but it requires knowledge about your speaker crossover points and the ability to balance the signals fed to each speaker driver. Done badly, you can ruin the sound you have now.
I'd say yes, technically speaking you are biamping. There should be no delays in each channel due to surround modes, as you mention. This is not something I would recommend you do. Each power amp channel would be amplifying the whole audio frequency which can tax your power supply and is a waste because your speaker crossover will filter out the signal portion that the individual driver can not produce.
In an optimal bi-amp configuration you would take your line level signal from a preamp output and run it through a crossover that splits the signal into two, low and high frequency. Those would then be fed into individual power amp channels for amplification to speaker level, then fed into the separate low and high frequency speaker connections. This makes your amplifier work less since each channel is only amplifying a portion of the whole signal.
Bi-amping can produce awesome results but it requires knowledge about your speaker crossover points and the ability to balance the signals fed to each speaker driver. Done badly, you can ruin the sound you have now.