Belkin PF60 with Monster AVS 2000 issues?

Hi Everyone. I have a question and was hoping someone would be able to help me out. I have a Belkin PF60 and the voltage on the screen says 121.9. I recently received a Monster AVS 2000 voltage stabilizer and I decided to plug in the Belkin PF60 into the AVS2000. After turning the AVS2000 on, it does its magic and stabilizes it to 120v, but for some reason, the display on my Belkin PF60 does not change and stays the same at 121.9v. Am I doing something wrong? Should I be plugging in my stereo equipment into the AVS2000 and not the Belkin PF60?

Any help would be greatly appreciated.
No, the displays won't read the same. I've got the AVS2000 and have used a Belkin PF60. When I had the two like yours, the PF60 was plugged into the wall, and the 2000 was plugged into the Belkin. That worked fine. BUT the two meters always measured different. No big deal, the voltage readout is not "labratory accurate" on either unit.

I wonder myself which should come first, the Belkin or the 2000. Like I said above, I had the Belkin first. Worked fine for me. My setup now is, instead of the Belkin, I have a Panamax 5300, and it is plugged into the 2000.

In both cases, I did what was convienent for me. You won't hurt anything by doing it either way.

One last point, I also use 12VDC Power Triggering on my system.
Thanks Joey! I always thought something was broken. Thanks again for your help.
here is the link from monster

look like avs2000 first then power center
Thuchien, Thanks for that!