Beautiful Vicoustic's flagship Wavewood panels for room tretment. Anyone?


Not in my room yet, but definitely the most beautiful acoustic treatment i’ve ever seen. Wavewood panel is made from a combination of acoustic foam and wood. Its instantly recognizable design results from unique research based on the acoustic properties of the wood and foam combined with non-linear sequential cavities that enable Wavewood to act as both an absorber and diffuser. The Expo Panel System consists of panels that are 3/4“ thick that are perforated following an optimal binary sequence that determines where holes are and where they are not. This scientifically proven approach eliminates the possibility of absorbing excessive high frequencies while preventing lobing effects that are common among many uniformly perforated surfaces. Damn, i need some of these in my white room!

Has anyone tried them? Normally room treatmentis so ugly, but those two solutions are just WOW

https://www.vicoustic.com/product/wavewood
http://rpgacoustic.com/acoustically-optimized-acoustic-wood-panels-offer-huge-benefits/
10076406 d6c5 4854 a751 76cefa9d8a70chakster
@chakster ,

Regarding the Stillpoints Aperatures… once you hear them in your space, you'll understand their value.
@slaw Relatively small Stillpoints panel is $800 each which is a typical High-End price tag for something that available 10 times cheaper from some other manufacturers specializing in acoustic treatment. Any panel for $800 is definitely not for me, sorry. I just don’t believe they can do any better than studio panels (absorbers or diffusers). A wooden frame with acoustic foam or fiberglass can not cost that much anyway. DIYers are happy to make them.

For my 33 square meters room i need about 70 panels of 5 different types according to the actual 3D analysis of my room made by Vicoustic engineers. Using acoustic panels without proper analysis of the actual room make no sense in my opinion. We gotta know where do we need acoustic tretement and why do we need them. They must be in the right place and must be effective.

And while the Stillpoints charge $800 per panes some other respected manufacturers charge $60 per panel (or $600 for 10 panels), i can see many of them, some looks great, some looks ugly.

Last night i’ve glued Vicoustic Wavewood panels on the wall using their Flexy Glue, this glue is removable like this without any damage. I watched these guys before i decided to buy mine, and it was pretty easy to glue the panels. I will continue next week.
I'm building a new listening room (new home) which has a limited size (interior-16'w X 19.5'l X 10'h). 

In my prior listening room which I had 39,000 LPs/78s on solid MDF shelving cabinets and on the floor and CDs in steel cabinets, with up to 11.5' high vaulted ceilings, multi-pane casement windows at first reflection and front wall, dual layers of drywall, etc.  Not a great sounding room with plenty of slap echo.  I treated the room with 2 pairs of Shakti Hallographs and 32 Synergistic Research HFTs.  The slap echo was ameliorated during music playing and sound frequency spikes were diminshed (greatly).  No problem with bass though.  This current room sounds better than 95% of the 100s of rooms I've heard at audio shows and audio salons.  

In the new listening only room (storage in an adjacent room), I'm building out the exterior walls with carbon filter absorption panels which are extensively built products unlike GIK cheap materials.  What looks like an interior room solution room is quadradic diffusion along the front and rear walls.  I doubt that the Stillpoints Aperture (I use only Stillpoints isolation products) would accomplish the same as these big, well built all wood products 
https://www.acousticfields.com/product/sounddiffuser-acousticdiffuser-qd13/   Yes, they are expensive, but once installed, don't have to be moved or augmented.  If I get to build my larger listening room, I would move them there.  The goal of the QD is to smooth the frequency distribution resulting in a room sounding twice as large as it actually is.  That's what I've been told.  Also, no more drywall on interior facing walls, only natural finished wood (plywood).  I anticipate that I will be able to duplicate my 40% current larger room with my smaller new room and add smoother mids and highs.  

The room acoustics is half the sound.  So many forums are concerned with small differences in sound for high priced equipment and tweaks.  I'm starting with the acoustics first.  I already have the equipment.
@fleschler nice, i was thinking about those wooden things, especially if they could be made locally (DIY), but in terms of design some of them are a bit ugly for a living room, but great for the recording studio.

Why i have mentioned the Vicoustic is because of the $50 option of the Room Analysis they are offering for everyone, based on 3d model of the actual room. So i got it from them.

But i want to double-check it using a trick with a mirror (see the next link)

For most of us (not specialists in room treatment) it’s important to understand the basics first. Long time ago i’ve noticed that the bass responce is way different in the middle and near the rear wall in my 33 square meters room. This video about standing waves is so funny. So the standing waves ... damn.

Something that i need in my room to treat it good:

1) Vari Bass or Super Bass Extreme or Premium

2) then Wavewood Diffuser and Wavewood Absorber

3) another Round absorber for ceiling and walls or Flat one as an alternative

4) and finally Bi-Dimensional Multifuser for ceiling.

In my sistuation everything must be WHITE color in my white room.

Would be nice to read more comments from people who already using those panels.




@chakster  You have a reason to use specific color and materials for your listening room, like my living room requirements (only SR HFTs permitted for good reason as it's a formal room with my small audio system. 

My new room is being built into a double garage; unfortunately, as the City of Los Angeles passed an anti-mansionization ordinance last year cutting in half the buildable lot area to 20% for RA zoned lots (most big lots in the City) over 20,000'.  They permitted large homes at 45% of the lot area for R1 zoned lots above 7,500' and 50% for smaller lots, which allows large homes on small lots still.  Super stupid planning as it halted development of new large homes on large lots.  

So, I can design the room freely as to color scheme and materials.  I'm going with carbon filters in the walls/ceiling for bass treatment.  Dennis Foley of Acoustic Fields did an analysis and will supply me with building plans, installation instructions, etc. for $2,500 (50% rebated towards the purchase of materials).  Vicoustic's $50 analysis appears to be similar but they give basic information and not as much support.