Well, I've years and years of day in and day out experience with more equipment than most people will ever have the luxury of putting their hands on in one life time! I have worked over the years (undisclosed) in 4 different high end audio salons, selling just about every immaginable brand of everything, and designing custom hi-end systems in some rather wealthy clients homes. My find from all these environments and exeriences I've been exposed to has been that "balance", and overall system/room synergy, is ultimately what it's all about when building a sytem properly in a given room...and that somehow or another, usually, entails adressing the proper interconnect combo for the system needs at hand...to give it that "balance" that pressents the system as neutral as possible!
As subjective as that "desireable balance" may be to one listener or another, in any given accoustical environment, I find that blending a proper synergy of interconnects and wires, ultimately, unfortunately becomes more and more necessary with the better more revealing hi-perfomance/resolution systems!!!
What seems to happen is, yes, certain cables I guess interact differently with different impedance loads and what not that are pressented. And, let's face it, not all equipment in a chain has the same sonic signature/and interfacing. Thus, I suppose, not being an engineer of sort, to explain it more from that stand point (although I know some engineers in the Audio business who are definitely not seeing the entire cable picture here from a proper perfomance perspective in my oppinion, to see the whole picture!), it seems, from my day in and day out experience in fine-tuning some outrageously good equipment for best performance, the match of cables seems to do best when mixed and matched. You just start out trying to put on the same types of cables when assembling these darn things. Then, after fumbling with em for a few day's/weeks/months, you find that those other cables you just switched out between one of the pieces in the chain(broken in ofcorse...I don't care what some of those "2 dimmensional" bone head engineers with PHD's say about "cables is cables" and crap!..especially if they measure out the same!...yeah right), makes the system sound,well, more right!!!...almost every time!
Now keep in mind, besides my own system tinkerings (and yes, I use mix matched cables ultimately in my system. I use Audio Quest Python b/amp and pre, and Harmonic Tech Truth between a couple of my source components and pre. I also use Harmonic Pro 11 pairs biwire for speakers), which have run the gambit of a lot of different cables combo's, some of the systems I've had the tinkerings with include some of the most expensive outragously transparent equipment pieces in the world! Making things that much more critical in balancing out all the pieces! What you usually find in such high perfomance systems, is that all the flaws in the chain are revealed more readily, making for higher demands placed on the individual matchings..again, the interconnects seem to differ in the end for best results.
So, to hit the analogy pressented by the guy regarding the race car, the higher the perfomance of race car your driving, the more critical each part becomes in "balancing" that race car out for maximum performance on a given track!!! I don't know about "good-ol-boy" dirt track racing out back, but I've done a bit of observing of Formula One racing over my years. And those Formula Racers will ALWAY'S tell you they make fine tune adjusts like adding 1 LB of air in a given differetn tire on a car for HUGE IMPROVEMENTS IN PERFOMANCE!!!...if they want to stay competetive day in and day out! Little stuff adds up to all the difference in the world when things get more critical!...all way's does, alway's will! You'll have to find out for yourself, I guess, how small changes affect the perfomance of your sytem "balance"!...in this case mix-n-matching those cables if that's what it takes...and if often does in my experince...
As subjective as that "desireable balance" may be to one listener or another, in any given accoustical environment, I find that blending a proper synergy of interconnects and wires, ultimately, unfortunately becomes more and more necessary with the better more revealing hi-perfomance/resolution systems!!!
What seems to happen is, yes, certain cables I guess interact differently with different impedance loads and what not that are pressented. And, let's face it, not all equipment in a chain has the same sonic signature/and interfacing. Thus, I suppose, not being an engineer of sort, to explain it more from that stand point (although I know some engineers in the Audio business who are definitely not seeing the entire cable picture here from a proper perfomance perspective in my oppinion, to see the whole picture!), it seems, from my day in and day out experience in fine-tuning some outrageously good equipment for best performance, the match of cables seems to do best when mixed and matched. You just start out trying to put on the same types of cables when assembling these darn things. Then, after fumbling with em for a few day's/weeks/months, you find that those other cables you just switched out between one of the pieces in the chain(broken in ofcorse...I don't care what some of those "2 dimmensional" bone head engineers with PHD's say about "cables is cables" and crap!..especially if they measure out the same!...yeah right), makes the system sound,well, more right!!!...almost every time!
Now keep in mind, besides my own system tinkerings (and yes, I use mix matched cables ultimately in my system. I use Audio Quest Python b/amp and pre, and Harmonic Tech Truth between a couple of my source components and pre. I also use Harmonic Pro 11 pairs biwire for speakers), which have run the gambit of a lot of different cables combo's, some of the systems I've had the tinkerings with include some of the most expensive outragously transparent equipment pieces in the world! Making things that much more critical in balancing out all the pieces! What you usually find in such high perfomance systems, is that all the flaws in the chain are revealed more readily, making for higher demands placed on the individual matchings..again, the interconnects seem to differ in the end for best results.
So, to hit the analogy pressented by the guy regarding the race car, the higher the perfomance of race car your driving, the more critical each part becomes in "balancing" that race car out for maximum performance on a given track!!! I don't know about "good-ol-boy" dirt track racing out back, but I've done a bit of observing of Formula One racing over my years. And those Formula Racers will ALWAY'S tell you they make fine tune adjusts like adding 1 LB of air in a given differetn tire on a car for HUGE IMPROVEMENTS IN PERFOMANCE!!!...if they want to stay competetive day in and day out! Little stuff adds up to all the difference in the world when things get more critical!...all way's does, alway's will! You'll have to find out for yourself, I guess, how small changes affect the perfomance of your sytem "balance"!...in this case mix-n-matching those cables if that's what it takes...and if often does in my experince...