Aurender N20 Music Server Comments and Observations


My Aurender N20 Music Server is installed and working great.  The N20 is supplied WITHOUT hard drives installed. This means hard drives are the customer’s choice. Each of the two rear panel mounting sleds accommodates a 1, 2, 4 or 8TB 2.5-inch SSD or up to 5TB 15mm height 2.5inch HDDs. Since users have different storage requirements, Aurender feels this is the best way to satisfy everyone.  Aurender recommends Samsung EVO (I used Samsung EVO) or QVO series internal SSD drives, and Western Digital or Seagate HDDs.

The SSD Disk installation means you loosen the screws on the back of the unit, pull out the slot, insert the SSD, push in and tighten the screws (top slot is Music1).  After I installed the SSD, I went to the Conductor App, settings, disk information tab to format the SSD (please see instruction links below).   If, for some reason, the format command does not appear, please power down (turn electrical power off) and restart manually.  Restarting takes time since the N20 has UPS circuitry inside.

I checked for software updates on the N20 (there were none) and deleted my old Conductor App and installed a new copy from the App Store on my iPad.

My First impression is it sounds excellent. The music is clearer, the bass is better, has more air and it has more musical details. The overall musical presentation is much improved.  I am listening to jazz now and the SQ is much improved.   I really like it.  

You know the music is great when I am typing my message and music catches my attention and forces me to look up.  This unit is truly outstanding.  I am very impressed. Cranking the volume and this unit is truly amazing. It is much improved over the N10.  The music has more feeling and depth.

I copied my albums from my LaCie external hard drive (backup drive) to the N20 okay.  I also ran the scanner, scan for newly added files, so all my albums appeared okay.  This worked perfectly.  Please note the scan for newly added files takes time to run (watch for messages on your App).   

A miracle!  Next, I restored my music1/backup and all my Qobuz links were returned. This is needed since my main library includes BOTH my stored CD’s and Qobuz links.  Previously, I used the backup my Music1 tab and also copied all my albums to my LaCie external hard drive.  For this step, I restored my settings from Music1/backup file.  This is a required step to ensure all my QoBuz related links were restored.  

In summary, my N20 is breaking in but out of the box, the N20 sounds terrific.   For startup purposes, the N20 displays a six-digit code that must be entered into the Conductor App.   The Aurender N20 Music Server is highly recommended.

Useful Aurender Users Guides and Web Manuals links are below:

https://aurender.zendesk.com/hc/en-us

SSD/HDD Installation Guide

https://aurender.zendesk.com/hc/en-us/articles/360045605693-SSD-HDD-Installation-Guide


I hope the above is useful.  


 

 

 

 

 

 


hgeifman

Showing 1 response by pokey77

@hgeifman 

Howard,

Thanks for sharing on the new N20. Without your thread, I'd of had no idea that there was a new player.

You may remember that you and I shared a number of conversations when I got my N10. The problem was that sometimes it sang, others it was nearly unlistenable. Long story short, it turned out that my 25mbs DSL connection was old and not always working well. Got that fixed, and sound was mostly the same - not a total fix. ATT has pulling fiber through the neighborhood and it finally became available. So I upgraded to 320 mbs fiber and the sound was not only a bit better, but stable all of the time. Finally, for whatever reason, ATT upgraded me to 1gbs at no charge. Sound get better again; even on my laptop running wirelessly in my office the music sounds better and the sound is now super stable.

FYI, do you have an upgraded internet switch? I purchased an Uptone Audio EtherREGEN the first of the year and it made a very considerable SQ difference. I also played around with a few Network cables and found that to be icing on the cake. I just added a Paul Hynes SR4T LPS and now it is just amazing what I'm hearing. Pretty magical for sure.

I have had the chance to interact with Harry? I believe his name is, a few times (2018-19). I remember telling him that customers would probably be willing to pay for a component that incorporated his 2X isolated lan port - I was thinking a second box that only did the isolation and maybe had a better power supply. It now looks like he has incorporated that into a few of his models. I'm not sure if what he is doing is similar to the switch/LPS I'm using, but they sure made a great difference for me. 

I will be interested to hear what you are hearing N10 vs. N20 comparison. Hope you keep posting about it.

BTW, I've heard the A30 and it may be near to the old W20, but not even close to the W20SE from what I remember; SQ on the SE model is pretty amazing, but I guess it should be at $22k.