AUDIOVECTOR SPEAKERS

I auditioned a lot of speakers: Persona, B&W, Wilson, and others when I found Audiovector.    I was actually introduced to it after listening to the Wilson bookshelf!

I spent a long time that day Listening to the Audiovector R1 arrete and just as I was leaving I asked about the R3 that was next to it.  Over a many more visits as well as listening to other speakers I simply fell in love with the R3 arrete.  I have a pair at home now that I've had for almost 6 months and they simply outstanding!

For me the AMT is what set AV apart from everyone else.  I prefer the R3 to even the Wilson speakers. 

Audivector R3 and R6 arrete´s are on my list to audition in the near future even tho Ive heard rumors that they need to be cranked up with volume to play at their best cos of their AMT tweeters. I normally lsiten to low volumes 80% of my time.

Audiovector's engineers still strictly follow the 12 basic rules laid down 40 years ago, and when they can use Titanium for the cone, carbon steel for the frame, rubber for the more complex ribs. , more durable, the driver uses carbon fiber happy wheels glass, using computers to perform complex problems in optimizing sound quality.

The fact that each Audiovector Arreté R 6 speaker has a port on the rear for anchoring the speaker is something that I found to be particularly fascinating. A Y cable that connects into each speaker and is connected to a single AC socket with three prongs and a single point that fits into an electrical receptacle was included with the speakers I purchased. Only the ground pin is connected; neither the hot nor the chilly wires are.

#Nerdle

taww. Thanks for your response I agree Gryphon would be an awesome piece to compliment my R6 not sure if you are familiar with Auris Fortissimo integrated class A/AB tube amp  2 great reviews on part time audiophile and stereo life magazine.My Goldnote PA 10 mono blocks with DS 10 worked beautifully on my Triangle Alphas so to be determined on the Audiovector r6 if I have the same .What are your thoughts on speaker cables vs my Caras Clear   Always appreciate other opinions 

For less expensive solid state, I know quite a few owners who are happy with Sugden. Luxman and Accuphase also a couple that can work well - basically fuller-bodied solid state. Lower power Class A is a great way to take advantage of the relatively high efficiency of Audiovector, as long as the amp has sufficient current capability and good bass control. 

@captainsteve congrats on the R6 order! For solid state, Gryphon is one of the best with Audiovector, especially Diablo 300 or Antileon EVO. Before moving to Gryphon, Audiovector often used Naim amplification. Pass also a great match - had excellent results with XA30.5 (plenty of power for the R6) and know people who are happy with XA60.8. I realize these are all considerably more expensive than e.g. the Goldnote. I do think if you are getting an Arrete, you will keep getting more and more out of the speakers if you scale up. It’s a $35k speaker and deserves commensurate upstream equipment. I find my SR6 Arreté to be easygoing to get to "good" sound, but like all high-end gear, quite finicky to get to "great." Cardas Clear is an ok starting point but you should be able to do substantially better, depending on the amp. Just my $.02. Enjoy the new speakers!

Have R6 arrete on order. Going to use Auris Fortissimo integrated and Cardas Clear rev1 speaker cables. Think I am at my end game would like to add an SS amp just for the variety not sure what would compliment the r6. Goldnote DS 10 pre/dac/streamer with Goldnote PA10 mono blocks might work 

Thanks for that. My only other choices similar price wise were ATC SCM40 or Spendor D7.2.

If your room is large enough to accommodate, I would go with the R3 Signatures as it should be more friendly matched with a mid-powered integrated amplifier and I think you will get better bass.

I’m considering either the Audiovector R1 Arrete vs R3 Signature. Clearly stand mount vs small floorstander and a quality difference. They will have to match a Naim SuoerNAIT3 / Chord Hugo TT2. No chance to audition, which would suit better ?

I'd be interested to hear more reviews. I'm considering the Audiovector R3 Arrete as an option for my space that doesn't allow me to pull the speakers that far from the wall. I found the bass to be a little less weighty than I would like. It's definitely punchy a deep but didn't get the visceral feeling I would like. Considering matching a sub with it for a flexible setup. I have a 21x11 room and have the speakers setup on the long wall.

In general I really like the Audiovector sound. The soundstage was big and unique sounding for such a small speaker. I'm not sure if it's the rear firing tweeters or what.

Big soundstage and easy to drive.  Build quality is excellent and they use some innovative technology.  Unlike many speakers using an AMT, they are not even a little bright.  Very natural.  

I have been flirting with an idea of signing up as a dealer.  R1s and R3s are awesome but it is a big jump to the R6 though it is a much better speaker.  

If you buy them I doubt you will regret it.  

I carried AudioVector speakers when I was in the business from the mid 80's - mid 90's. They are excellent speakers, solid performance, great build quality and work fine with tube gear & solid state.