Audiophile fuses - Synergistic Black fuses vs the còmpetition


Between friends samples and onew I havd bought I find that these Synergistic fuses to be the best balanced. And without question inner detail .I originally had Hifi tunING supreme.which are good  but not in the SR class 
The Audio horizon I found more tipped up compared in certain areas furutech were no where's as detailed . The SR  Black fuses use the latest in Graphene  technology everyone from Nasa 
To the latest hi tech 3d printing and many 1,000s denser then Copper.Silver or Platinum.
All super computers are now using and soon home computers it is much faster and accurate.
But also smoother and more organic sounding parts connecxion if you purchase at least 3 or more 
May give you a respectable discount. Email Chris the owner at Tech go to the site . Lucky I only had 5 in my system. One thjng that was surprising is that I put one in my JL audio  Subwoofer  thd bass was noticeably more accurate and articulate.  2 thjngs to mention .these fuses take up to 200 hours to fully runin.but after 100 hrs 90% of the runin  is complete, also  Always go up to the next size ,for standard cheap steel fuses can vary up to 15%,where these fuses are typically within 
1%.  I found that no fuses popped .on a Modwright pre I popped 2 , then went from 2 to 2.5A
No problems and Make sure you get proper  slow-timed ,or Fast blow. A No Brainer like a very good cable upgrade and comes with a 30 day money back guarantee. 
128x128audioman58

Showing 1 response by almarg

FWIW I have never seen a +/- tolerance specified by any manufacturer of any fuse for either current rating or melting point. What is generally specified by Littelfuse and Eaton/Cooper-Bussman for their fuses, in addition to the nominal current rating, nominal melting point, and various other specs, are the minimum and maximum opening times for various percent overloads relative to rated current. For example, the minimum and maximum possible opening times when the current being conducted is 200% or 400% or various other percentages of the current rating of the fuse. Those tolerances (the differences between min and max) are usually fairly wide. I have never seen that kind of specification for any audiophile-oriented fuses, however.

Regards,
-- Al