Anyone tried a different tube in Peachtree Nova?


I recently purchased a Peachtree audio Nova integrated tube amp. I have heard, and do attest, that there is very little if any difference in bypassing the tube or using the tube in this unit. It came stocked with a 6922EH tube that is a ~$15 tube. If I cannot tell a difference in using the EH tube, will chaning tubes make a difference? Anyone out there experimented with different tubes in the Nova?
hooper_ke
Would it be possible to change the 6922 for the 6n1p (which is the one in the iNova). The only difference is that the 6N1p has a higher heater current
Hopper Ke;

I have the Nova as well and have been using it for about a month and I agree with you that I have not really been able to ascertain a difference between the tube and the solid state outputs on the pre-amp. I was hoping that the tube would give a slight warmth particularly in the mids, but I have not felt that it has achieved the degree of warmth I was expecting.

My understanding is that there is a mod in the works for a tube swap, but I am unsure of which tube is being considered and if it is in conjunction with any other cap replacement.

I am only using the unit as a preamp, a dac, and on rare occasions as a headphone amp. I am pleased with the dac performance particularly from red-book cds, but not quit as impressed with its performance on the files from the computer or the IPod. Let me know if you find out a good alternative to the existing 6922.

Cheers,

Bruce
Ah, thanks. You're right, that's not possible on the Decco.
I have tried both a Tungsram and a Telefunken in the Decco and can't say there is a huge difference. The Telefunken is in there now. It's pretty inexpensive to pick up NOS single 6922's or 7308's and give it a try.

The only other tweak I've done to the Decco is to apply a few coats of dark red fingernail polish to the LED under the preamp tube so that it glows orange rather than garish yellow.
There is a button on the remote that will turn the bypass on and off. When the tube is being bypassed, a blue light will come on behind the tube. It is mentioned in the manual. I don't think it was possible on the Decco.
Hooper - how is it that you can bypass the tube? I own a Decco and have used it both as an integrated and as a preamp with an external amp but in both cases the tubed preamp section is being used.