Anyone have a pic to show me where to replace HEXFREDS in a Cary CAD-120S?

You can do this simple mod with a little help. Very easy. Good luck! While you are it it replace those electrolytic power supply caps with film! Bigger improvement in sound. 

I am pretty sure, not positive, your caps are in series. You may only need 600uf! Two caps only. Also you don't need as much capacitance with these TC caps. 

Also, I purchased them as part of a 25% off sale! The ASC caps are on closeout at Parts Connextion for only $9 each! 

My Cary amp has 2-560uf caps that I replaced with Clarity TC caps. I had to add a 3 inch wooden expansion chassis to fit them. These 1200 uf caps could be replaced with Clarity TC caps as they can be ordered up to 600 and above uf. Problem is they are the size of those large 3 inch in diameter computer grade caps made by Mallory and others. Clarity TC caps are sold by Parts Connextion and they are the best I have used in power supplies. Wonderful. Larger values can be ordered directly from Clarity. 

Also, I think your 1200uf caps are in series, like mine, to handle the voltage near 500vdc. The Clarity TC caps handle 600 Vdc so no need to put them in series. This means 600uf is closer to your target with Clarity TC. My 560uf caps were in series so I only had to deal with 230uf total. My four 80uf TC caps would have been enough, but I added capacitance because I had the room. 

With Clarity TC you don't need 600uf as builders, modders, and Clarity point you can achieve the needed results with lower uf options from Clarity. Look them up on the net and read about it. 

Here are some pictures of my Cary Rocket 88r mod with those blue Clarity caps. I also put some ASC film caps in the power supply...those white ones. The amp no longer has any electrolytic caps in it. All replaced with far better sounding film caps. Mundorf Evo, Clarity TC, and those ASC film caps. 

Here are some pics. I used 4-80 uf Clarity TC caps as well as those ASC. 

http://s1097.photobucket.com/user/grannyring1/slideshow/Cary%20Rocket%2088r%20upgrade%20and%20mod

Correction. I did not use Mundorf Evo caps, but rather Clarity SA caps that were on sale in place of 10uf  electrolytic caps. I also used Obliggato film caps to replace the 47uf electrolytic caps. Those are the large black ones you see. Big improvement!

Nice coupling caps.