Anyone else making their own cables?

Over the years I have owned a lot of different brands of very sought after and very expensive cables(interconnections both balanced and single ended and speaker cables). Each time selling and then trying another. I recently have been experimenting with making my own. I have been doing a lot of reading on the subject of design. Also I have been dissecting some old inexpensive ones I had lying around. I am starting with ic's. From my experience and what I have read, when done right balanced is the superior method. What I had not realized is that single ended cables can be balanced as well. In fact Annolog(vinyl) starts out as balanced. This is the way I have chosen to make my cables. Also I have found that grounding at the receiving end and simply connecting the grounds at the sending side works best and in my view is the only real reason for directional cables. I have been using wbt and eichmann ends. I would like to hear from others with knowledge of design, cable types and materials, soldering, end type(brands) and their benefits and covers to improve final appearance. I would also be interested in any other point I have not mentioned or to simply disagree with any assertion I or anyone else makes on this subject. I do realize that cables are the single most controversial subject in this hobby. I am not trying to settle that argument. Just offer another option. It may even prove cheaper to buy a brand cable then make your own. I do not have a degree in engerneering nor am I an electrician or computer genius. Just a long time audiophile. My single ended cables are for vinyl set up(turntable to step up transformer to phono stage). Balanced everywhere else. My system is fully balanced(as earlier described) from end to end. Thanks for informative insights.
Af65fef1 6645 4c02 a34c 7e7ea5b5a0a8pkoegz

Showing 2 responses by raymonda

I've basically stopped buying commercial cables years ago, not a good value IMO, and instead went to making my own, much better value and much better results vs cost.

You can make a kick ars cable for under $100 that would cost you $700-2500 from a cable company.Y(EARS)MV, but you should give it a try.
The cable that grounds the chassis together is not the same as a balanced cable.

A balanced cable is related to balanced circuit design.