I say the obvious choice since you are all Parasound would be to go with the JC-1s. You have everything pretty much dialed already so I am going to suggest something maybe even before an amplifier upgrade. The Oppo 95 are awesome, but you can do better with an external DAC. I say try a Bryston BDA-3 DAC to go with the Oppo. It has about 10 inputs also HDMI in and out. It will do DSD over HDMI from SACDs.
Amplifier Upgrade Decision
Hello,
I need some help/feedback with regards to upgrading my power amplifier for 2 channel music. My current set up includes following components
1. Source (Digital)- Oppo BDP-95
2. Source (Analog)- Clearaudio Concept Turntable
3. Pre-Amplifier- Parasound Halo JC-2
4. Pre-Amplifier- Parasound Halo P-7 (using the phono interface for playing the turntable)
5. Power Amplifier- Parasound Halo A-21
6. Front Speakers- Aerial Model-7T
7. Power Cable- Nordost Heimdall 2 and Red Dawn 2
8. Interconnect Cable- Nordost Frey 2, Heimdall 2 and Red Dawn 2
9. Speaker Cable- Nordost Red Dawn 2
10. Wall Receptacle- Furutech GTX-D NCF(R)
11. 2 Dedicated 20 Amp (10 AWG) circuits feeding the entire system
12. GIK Room Acoustics Bass traps/Diffusors
13. Room size- 16’ X 12’
This set up sounds good but I wanted to take it to the next level and wanted to upgrade my amplifier to a better 2 Channel amplifier or a set of mono-blocks. I love Class A/AB sound and would like to stick to this technology. My choices, not in any particular order, are
1. Upgrade to a Plinius SA 103 (125 W pure Class A per channel) and use it as a 2 channel amplifier
2. Upgrade to a set of Class-A mono-blocks. My choices, not in any particular order, are
a. Parasound Halo JC-1
b. Pass Labs XA-60.8
My budget is around 10-12K.
I know everything is system dependent but I would love to hear your opinion on these amplifiers before starting on product evaluation.
I am also not sure if my mono-block amplifier choices would provide significant value add from a sound perspective over the Plinius or any other good quality 2 channel amplifier at this price point. So I would love to hear your feedback on this point as well.
I need some help/feedback with regards to upgrading my power amplifier for 2 channel music. My current set up includes following components
1. Source (Digital)- Oppo BDP-95
2. Source (Analog)- Clearaudio Concept Turntable
3. Pre-Amplifier- Parasound Halo JC-2
4. Pre-Amplifier- Parasound Halo P-7 (using the phono interface for playing the turntable)
5. Power Amplifier- Parasound Halo A-21
6. Front Speakers- Aerial Model-7T
7. Power Cable- Nordost Heimdall 2 and Red Dawn 2
8. Interconnect Cable- Nordost Frey 2, Heimdall 2 and Red Dawn 2
9. Speaker Cable- Nordost Red Dawn 2
10. Wall Receptacle- Furutech GTX-D NCF(R)
11. 2 Dedicated 20 Amp (10 AWG) circuits feeding the entire system
12. GIK Room Acoustics Bass traps/Diffusors
13. Room size- 16’ X 12’
This set up sounds good but I wanted to take it to the next level and wanted to upgrade my amplifier to a better 2 Channel amplifier or a set of mono-blocks. I love Class A/AB sound and would like to stick to this technology. My choices, not in any particular order, are
1. Upgrade to a Plinius SA 103 (125 W pure Class A per channel) and use it as a 2 channel amplifier
2. Upgrade to a set of Class-A mono-blocks. My choices, not in any particular order, are
a. Parasound Halo JC-1
b. Pass Labs XA-60.8
My budget is around 10-12K.
I know everything is system dependent but I would love to hear your opinion on these amplifiers before starting on product evaluation.
I am also not sure if my mono-block amplifier choices would provide significant value add from a sound perspective over the Plinius or any other good quality 2 channel amplifier at this price point. So I would love to hear your feedback on this point as well.
- ...
- 45 posts total
- 45 posts total