Sounds good, thats basically what I was looking for.. I plan to keep it simple, so 1.6g tops is the kinda thing I was looking for. Vta I will run it level as possible and then simply adjust the tracking weight when its in position of its final vta for now, Although I do not know what the suggested Vta is on my cart. I am not so sure it says anything in the specs about that. Thanks
A question for the Pro's in setting up analog good
I purchased a Musical surroundings Phono Amp and a Music Hall MMF7 Table and arm which are on stereophiles list and also have pretty good private praise from audiogon and other sources, the combo has not been set up yet...
Question 1= I have a 47k rated cartridge of the MM variety, my phono amp is adjustable but should I set it at the 40k or 50k? I do not believe it is capable of doing exactly 47k....
Question 2= the cartridge is 1.5g recommended tracking weight... So should I experiment and go heavier to like 2g? what will the rule of thumb be, higher weight = better bass or what is the supposed effect?
Question 3(maybe)= Also, I have never had a table to know what VTA is? I guess it adjusts the height of the entire arm, so what is the goal with this adjustment, to get it parallel as possible while actually playing the LP? what effects will occur moving it up and down? (again for example better bass, worse bass, tradeoffs?)
I do have a shure stylus gauge and used it to set up a temporary table before the new purchases, with your basic alignment mirror for the whole cartridge setup and do know how to use them pretty well, I actually got the temp table sounding good and working perfectly no skips or anything, so now I just would like a decent understanding of what is gonna happen adjusting the parameter one way or the other and there effects, just in case It sounds like I am lacking in something what will correct it if you know what I mean. Like if the Bass is weak is more weight on the cart. the answer by going up a 1/4g, or changing the impeadance in the phono amp down to 40k vs. 50k going to fix it?
The phono amp does have gain adjustment too, but I know pretty much how that will work and this one is very good at the 40db setting as it sits.
Thanks and sorry for a long post
Question 1= I have a 47k rated cartridge of the MM variety, my phono amp is adjustable but should I set it at the 40k or 50k? I do not believe it is capable of doing exactly 47k....
Question 2= the cartridge is 1.5g recommended tracking weight... So should I experiment and go heavier to like 2g? what will the rule of thumb be, higher weight = better bass or what is the supposed effect?
Question 3(maybe)= Also, I have never had a table to know what VTA is? I guess it adjusts the height of the entire arm, so what is the goal with this adjustment, to get it parallel as possible while actually playing the LP? what effects will occur moving it up and down? (again for example better bass, worse bass, tradeoffs?)
I do have a shure stylus gauge and used it to set up a temporary table before the new purchases, with your basic alignment mirror for the whole cartridge setup and do know how to use them pretty well, I actually got the temp table sounding good and working perfectly no skips or anything, so now I just would like a decent understanding of what is gonna happen adjusting the parameter one way or the other and there effects, just in case It sounds like I am lacking in something what will correct it if you know what I mean. Like if the Bass is weak is more weight on the cart. the answer by going up a 1/4g, or changing the impeadance in the phono amp down to 40k vs. 50k going to fix it?
The phono amp does have gain adjustment too, but I know pretty much how that will work and this one is very good at the 40db setting as it sits.
Thanks and sorry for a long post