2. tech-talk
  3. 147852-121242

A DIY Swarm-based Distributed Bass Array for SOTA Bass

State of the art bass turns out to be a lot more affordable - and achievable- than you think. It just requires a new approach.

The physical realities of low bass in small rooms is discussed by Earl Geddes in "Why Multiple Subs?" http://www.gedlee.com/Papers/multiple%20subs.pdf

Basically, a 20Hz wave is 56.5 feet long. So any bass that low is bound to bounce off a wall long before it even becomes a full wave. Then as it bounces back it runs into itself, either canceling or reinforcing itself, and this all happens even before one full wave can be produced. This is just physics, or acoustics if you prefer, and happens in every room and always regardless of speaker design. As Geddes has shown the shape of the room hardly even matters. At residential sizes they are all pretty much the same. So the conventional approach of one or two subs cannot possibly work. It never could. It was doomed by the physical and acoustical constraints of home-sized rooms.

With four however it becomes almost trivially easy. Not in the sense of being perfect. Its not magic. The quality and performance of the four speakers still matters. But its trivially easy in the sense that the improvement inherent in using four is so great as to swamp these details.

Or at least that is the conclusion that led me to build my own distributed bass array.


The Distributed Bass Array

The system I built is based on the Audiokinesis Swarm subwoofer system http://www.theabsolutesound.com/articles/audiokinesis-swarm-subwoofer-system/ with help from Audiokinesis himself, Duke Lejeune.

It uses four 10" Morel drivers https://www.parts-express.com/morel-ultimate-uw-1058-10-subwoofer--297-130

These drivers at the time included sealed 1.25 cf cabinets. These go together easily with minimal woodworking skill and tools, but that would mean four sealed cabinets. Duke suggested building two ported would give the added option of being able to easily tweak the bass response if needed by simply plugging a port or two.

With ported enclosures there is a relationship between volume, port dimensions, and tuning frequency. Basically, a bigger cabinet volume, longer port, and smaller port diameter yield a lower tuning frequency. A smaller diameter port doesn’t need to be as long. But it needs to be big enough to pass the volume of air quietly, without chuffing. Just a few of the many details designers like Duke know in depth. Me, I used one of the on-line port length calculators. Which just happened to give the same answer as Duke gave me. So I know the calculator was right.

As a result, two subs are 16" sealed cubes, and two are 16x16x24 ported cabs, with 3" diameter by 20" long ports. According to Parts Express this results in an f3 of 52 Hz for the sealed subs, while according to the on-line calculator the ported subs are tuned to 20 Hz. I take all this with a big grain of salt or as an estimated starting point at best, as room reinforcement at low frequencies is so big a factor. The goal is simply to get in the ball park, or close enough for a little port plugging, phase adjusting, maybe even a touch of EQ to do the rest.


The Amps

Duke’s Swarm system uses the Dayton subwoofer amp https://www.parts-express.com/dayton-audio-sa1000-subwoofer-amplifier-rack-mountable--300-811
While one amp would do nicely, because almost all bass is mono, still there is an advantage in terms of flexibility in using two. The Dayton amps are adjustable for crossover, level, and phase. A main reason a DBA works so well is the four source locations results in a smoothing of modes. Another factor is the way we perceive the size of the space we are in is related to the mixing or randomness of the lowest frequencies. The idea is that being able to adjust phase can further smooth or blend modes resulting in a greater sensation of being in a larger space.

At this point however I had a bit of a problem. My Melody 880I amp has no pre-out while the Dayton amps have only line-level inputs.

There are plenty of Line Out Converters but they all look cheesy to me. So instead I opted to convert one of my unused RCA inputs to a Line Out.

Converting speaker output to line level is a simple two resistor circuit. One 10k drops the speaker level, one 1k provides a little impedance to the outboard component. http://www.epanorama.net/circuits/speaker_to_line.html With a foot or two of spare silver wire and $2 worth of resistors soldered inside the Melody retains its stock look and is ready to drive the Dayton sub amps.


The Setup

This is the hardest part with the conventional approach, figuring out where exactly to put the sub to get smooth flat bass. Okay, technically not hard- impossible! With four however...

I spread the four around the room- near the left corner of the front wall, a little further than that from the front corner of the right wall, the remaining two on each side a little further back than the sweet spot. Fairly random. They all face the wall.

One run of ordinary 14 ga wire, at least for now. The two 8 ohm subs on each amp wired in series is 16 ohms, or 4 ohms in parallel. I tried both. The bass is a little more taut and defined at 16 compared to 4. Either way the result is leagues beyond a conventional sub.


The Sound

Finally! Setting up the Talon Roc the DBA replaced I knew would be a chore so for that I used a warbled test CD. Having read so much I was so sure the DBA would not be like that this time that I put on Bela Fleck’s Flight of the Cosmic Hippo. This track features some incredible low bass. Bass that trailed off to nothingness with my Talon Roc. Bass so low I had only heard it done even halfways decent one time- in the gigantic basement of a speaker designer (Linaeum) in Beaverton.

The DBA, speakers plopped down with zero effort, no cones, plain old lamp cord, and only the crudest guesstimate levels set, reproduced the Cosmic low bass of the Hippo so perfectly I could hardly believe it. Everyone talks about sub compatibility, matching, phasing, yada yada- forget about it. If my experience is anything to go by just plop four subs down, sit back, and enjoy. Try not to giggle. Seriously. Try.

The bass from these things is just crazy fast, articulate, powerful and smooth. Uncannily so. The Absolute Sound review above describes this so beautifully I have little to add. What I will add, as amazing as the obviously low powerful bass that you’re aware of hearing is, what is even more amazing is the effect of the very unobviously unpowerful low bass that you’re not.

What I mean is, several times now I have been listening to music that seemed to have no low bass content at all. Why then does it sound so much better? What is the DBA doing??? Sometimes, as with piano, it makes sense. The piano is a physically large instrument. The lowest A on a modern piano is about 27.5 Hz. With string bass its 31Hz to 41Hz, four or five string, depending. All likely with a physical presence that extends a bit lower than their fundamental notes. So with a little thought its easy enough to see why these sound better with the DBA. But what about the rest? Why am I getting the sense of the whole recording being bigger, better, more real and present in the room?

Or should I say, not that the recording is in my room but that I am in the recording room? Duke and others have talked about a sense of envelopment. Something I have experienced for a very long time going back to my first concert hall experience as a youth is the unique sonic signature of large spaces. If you’ve been to a concert you know the feeling. You walk in and not only your ears but your whole body feels the sensation of really, really, REALLY, I’m talking subterranean low bass.

Now honestly, the DBA is not that. Maybe with four 15" subs it would be. If its even on the recording to begin with. Not the point. The point is, the DBA is at least getting to the point where this is where you have to go to try and describe it. Its that good.
128x128millercarbon

Showing 19 responses by millercarbon

millercarbon's avatar
millercarbon OP
12,531 posts
 

The sealed subs are 16" cubes and look like these

 

The ported subs are the same except 8" taller to get the extra volume for a ported enclosure. I wouldn't bother with this again, would just do all of them the smaller sealed cabs. Mine were a package deal, free cabinets is hard to beat! The package deals they have now are good, but use a lesser quality driver.

For reference, the Morel 10" is a much better driver than in the Swarm. Duke himself told me so, and he would be the one to know. So you can decide for yourself, but you will get excellent results from the current package deals, they are probably just about level with a Swarm.

I don't do measurements. My ears and butt tell me all I need to know. Read Tim's comments above, he has a Swarm which is roughly equivalent to what you will have with one of the 10" sub packages and one Dayton SA1000 amp.  

 

millercarbon's avatar
millercarbon OP
12,531 posts
 

Thanks for reviving this discussion. I forgot how good it is. noble100 is one of the most knowledgeable sources around. My DBA was built after studying everything he had to say, plus Duke, and of course the two big guns Geddes and Toole. What it all comes to boiled down, use four and it is real hard if not impossible to screw up.

Mine are I think the same Morel 10" drivers. Parts Express was having a special, pre-cut ready to assemble cabinets for free. All I did was convert two of them into ported, just in case. Doing it again I wouldn't bother. Also got 2 Dayton amps, thought that would be nice, don't really need them at all. 

You will learn a lot, and in the end be crazy happy. There is no bass like DBA bass!

millercarbon's avatar
millercarbon OP
12,531 posts
 
Yes it is that simple. There are lots of options but that is the easiest way to go.
millercarbon's avatar
millercarbon OP
12,531 posts
 
Congratulations. In a sense, considering how long ago this approach was discovered, we are all late comers. Well, all but Duke. Even Tim who caught on I think it was something like a decade ago, even at that point the concept had been around a good many years. People are slow to catch on to new ideas. I was shocked myself just how good this works. That is why I wrote it up the way I did. Now you know, too. Cheers!
millercarbon's avatar
millercarbon OP
12,531 posts
 
Actually comparing dimensions, the HSU subs are virtually the same size as my Morel cabinets. The freebie sealed ones I used are only 2.5" smaller each way- 15.5" vs 18". But the ported ones I made have to be higher volume, they are the same footprint but 8" taller. Call it a draw.  But the HSU subs are self-powered. The Morel need an amp. Add in the Dayton amp, hard to see how the whole package is taking up less space. Probably 4 HSU overall total space is less than my Morel/Dayton setup.

Honestly having read the reviews and specs on the HSU if I was doing it again today I would just buy 3 of those to add to my Talon Roc. That would be more and deeper bass, with more headroom (able to play louder), take up less space, be more flexible (control of each individual sub), and cost less! Even paying extra to get the Hsu in Rosewood would merely bring the Hsu up to about the same as my DIY Swarm in Rosewood. Same money but huge time and effort savings!

Another thing I have learned, once you get the bass nice and smooth and deep by having four subs, its really, really hard to have too much bass. I'm talking headroom, not level. Its easy to have too much bass, just set the level too high. Its also easy to have too much bass, just use one sub to have too much bass here and there. But with four subs, set up so the bass is nice and smooth and deep, its just really hard to have too much headroom. In any case its certainly better to have it and not need it than to need it and not have it! 


millercarbon's avatar
millercarbon OP
12,531 posts
 
The more, the better. Regardless of room size. My impression is most of the problems people associate with getting good bass in a smaller room is due more to their old-school thinking than anything else. I mean if you think the answer is one big sub then you put that in your little room and sure enough you get one big problem with one big mode. But if instead you put 4 subs in there, well then you get 4 smaller modes and therefore much smoother, which equates to faster more articulate, bass.

There even was a guy on another thread asking how should he try running his 4 full range speakers. I suggested using two of them in corners as make-shift subs. It worked! Which is not to say the quality of the sub doesn't matter, just that having more helps a lot even if they aren't the best subs.

So I would go for 4 but not let that stop me from trying 3. 

My experience has me convinced that another outmoded or unfounded view is this idea of integration. Not saying the subs don't need to be adjusted for smooth frequency response. Not saying that at all. But when people talk about integrating I never get the impression that frequency is all they're talking about. There always seems to be the underlying assumption there is timing to consider, as if the subs need to be equidistant the way the stereo pair do. Or that they need to be voiced the same, or have the same response characteristics (my electrostatic speakers are hella fast, so only hella fast subs yada yada) all of which I think is unfounded, unsupported, indeed in many cases totally disproven by actual research. Let alone practical experience. 

So yeah, no problem getting whatever you want- Morel, more Hsu, more whatever- to work well with whatever you have. Which is better comes down to your personal preference as to what will fit, where it will go, and what it will cost. On that score the main thing to keep in mind is the more you have the less sensitive they become in terms of placement. With one or two you struggle to get smooth response. With 4 it becomes easy, just spread them around asymmetrically. Sure some locations are better than others its just nowhere near as critical as with only one.

As far as which one to do, the advantage of the Dayton setup is the amp has a really nice combination of crossover, level, boost and single band EQ. But at the disadvantage of space for the amp, and limiting your two (or more) subs to the same setup. With individually powered subs you might lose a little EQ control but you gain a lot by being able to set level and everything else individually. That can come in real handy especially in a small room. You may for example find one little spot of low end bass hard to fill when setting levels for two or more subs that you could easily cover with just one sub set to get just that one little band.


millercarbon's avatar
millercarbon OP
12,531 posts
 
Alright. But I only wear the Tommy Bahama silk lab coat with subtle palm tree pattern. Goes with the whole Pina colada listening theme. Just so you know. Which reminds me, get that pineapple juice chillin'.
millercarbon's avatar
millercarbon OP
12,531 posts
 
Its really only a mystery in the sense of not being able to say for certain exactly why. But I have a pretty good idea.

The marginal 4 to 5 improvement I interpret as "all other things being equal." Which would apply if all I did was add one more sub just like the other 4, run off the same amp, at the same power, and volume. 

Which is not what I did at all. Instead what I did was add a completely different sub, a lot bigger (the Roc is two woofers in an isobaric ported enclosure) and with its own amp, and its own volume level. 

Probably if I was to go to the trouble of measuring and calibrating the Roc level to match the other subs, and then measuring and comparing, probably then it would turn out to have only marginal improvement. But that's the difference between serious guys who earn the lab coat and guys like me who really only care about the bottom line. Or bass line. Whatever.

Also in case I forgot to mention the improvement is mostly in the sense of headroom. The original 4 in other words could be set to give about the same amount of really low bass. But at that setting the amp would sometimes clip pretty bad. When the Daytons clip it sounds really bad. The Roc adds enough headroom to fill in the bottom end without running the Daytons too hard. 

Now if I was worth the lab coat then I would measure and probably find the really low bass that impresses me so much is really only 2 to 4 dB louder. But in human perception terms we experience that as more like 10 dB, which is a lot. 

I guess from reading these posts it seems like all I do is experiment. In reality I hate this stuff. I just want my Seal, Warnes, etc and movies to sound real good. Getting there..... getting there....
millercarbon's avatar
millercarbon OP
12,531 posts
 
Before the Swarm there was the one Talon Roc subwoofer. That came out, intending to sell, when the DBA went in. But too busy to sell it was just sitting there in another room. One thing I've definitely learned about bass: the more sources the better!

So curious, the Roc went back in. Stuck right in a corner. Crossover turned as low as it would go. 50 Hz, higher than ideal since we are at this point down to that lowest octave. But whatever. Give er a go.

Which honestly, wasn't expecting much at all. My biggest let down with this sub was always that no matter what or where it went it just wouldn't go real low. Always blamed the sub. So if it was incapable of really low bass then how's it gonna be any different now?

Well part of it may be the way we hear bass. Duke has said many times we perceive bass volume a lot different than higher frequencies. So even a little more (measured) can sound like a lot more (perceived). Part of it may also be a sort of reinforcement effect with the Swarm. Which ultimately that comes back to the first reason. I don't think its location, since I tried one of the DBA subs in the same spot. 

Anyway, whatever the why, the result is clear. The sound with the 5th sub is sublime! 

Tim's room is almost identical to mine. About 1 foot difference each way. His set up and listening position however is completely different. I've checked his in mine and its no wonder he raves the way he does. In my room however, with my locations, the sweet spot is just about the biggest bass null in the whole room. Its sweet because the bass there is super tight and clean, but a bummer because its hard to get enough. 

Until now. The 5th sub has solved that problem! Before, with "just" the 4 DBA subs it wasn't possible to get this much really low bass without sometimes driving the Daytons to clipping. Now though with the Roc filling in that last little bit the Daytons get a break and its awesome.

Again, same as with the others, its impossible to localize the sub. Bass "imaging" is at least as good as ever. Best of all, there is definitely an increased sense of the walls disappearing and being in a much bigger space. 
millercarbon's avatar
millercarbon OP
12,531 posts
 
One key to better bass definition: higher impedance. Check it out:

The Swarm/distributed bass array setup I’m using consists of two amps and four 8 ohm subs. This makes it easy to compare the same speakers being driven at 4 ohms, 8 ohms, or 16 ohms. Simply change a few connections.

With two amps then each pair connected in series gives a 16 ohm load, or 4 ohms connected in parallel. With one amp, each pair is connected in parallel (4 ohms), then both pairs are connected to the amp. Since the amp drives them in series this results in an 8 ohm load.

Duke said all his customers who have compared have preferred the 16 ohm load. Me too. Its pretty obviously better.

At 16 ohms the bass is noticeably more taut, dynamic, and well-defined. This is the way mine were first connected, and its clear now this had a lot to do with my enthusiastic initial impressions. Going to 4 ohms the amps do make a lot more power. But the volume gain from the power isn’t all that much, and is only noticeable at the highest levels anyway. The improvements in transient detail and clarity on the other hand that you hear with 16 ohms are bigger and are there all the time.

8 ohms is somewhere in between. If forced to guess, maybe a little closer to 4 than 16. Theoretically of course, one vs two amps, the comparisons aren’t exactly the same. But its been demonstrated (comments above) there really is no noticeable difference in bass running with one vs two amps. The advantage of two is flexibility, mostly being able to fine-tune with phase. Take phase out of the picture and its a pretty valid comparison.


millercarbon's avatar
millercarbon OP
12,531 posts
 
Close, yeah. Remember the goal is more modes so if one is right in the corner then try and get the other a little one way or the other. But if you can't, you can't and in any case more is better. 

Smoothing the hump, I can relate since I have the same thing with my mains. At least with the subs its less noticeable because they drop off less below the hump. Its possible but probably unlikely the added subs can be set up to cancel the hump a bit. More likely though you would move the mains. Unless you high pass the mains, in which case you can EQ. But that to me is kind of a last resort. In addition to the usual EQ shortcomings you will be losing the mains as additional bass sources which is foundational to the whole distributed bass array approach.
millercarbon's avatar
millercarbon OP
12,531 posts
 
If your two are located according to the old customary way then you might notice a further small improvement moving one or both a lot closer to a wall, and more importantly, asymmetrically. The more asymmetry you can get the better. In other words, one on the front left the other on the right front is better than left and right on the front- and better still, each a different distance from the corner.

Placement with subs is super critical with only one, but the more subs there are the less important it becomes.
millercarbon's avatar
millercarbon OP
12,531 posts
 
Yeah, its freaking amazing what happens when you get four in a room. Way better than I was expecting. And I was expecting a lot.
millercarbon's avatar
millercarbon OP
12,531 posts
 
mitch2
When running a swarm system, are all four subs handling a summed (left and right channel) signal?
I run two subs in the front so each side gets its own signal but I have considered adding a third and I remember reading that running a third sub with a summed signal (only on the third sub) could also be a significant improvement.


When 2 or 4 are connected to the same amp and the amp is mono (like the Dayton SA1000) then yes they are summed. Connecting a third will of course be a lot better. Geddes (I think it is, probably) gets all mathy and expresses the improvement in terms of variance as being 1/n with n being the number of sources. In other words, the more subs the bigger n is and the smoother the bass will be. Doesn’t take a lot of math to see going from 1 sub to 2 is twice as smooth, going from 2 to 3 is 50% smoother, from 3 to 4 is 30% better. Notice the gains, big at first, get smaller as you go. Or as Duke says, four is great, eight is grounds for divorce. Or something like that.

Running two amps as I do does allow them to be run in stereo. But there’s virtually no stereo low bass and that’s not the main reason for doing it anyway. Its done to be able to even further smooth the modes by being able to adjust phase. I’ve hardly had time to try this so stand by for now but from what Duke and others have said it can add an even greater sense of space and envelopment.

If you add a third sub one thing you can try even without any phase adjustment is to reverse phase on one or more of the subs. Equivalent to adjusting phase 180 degrees in other words.

So adding a third sub is a good idea- more bass, smoother bass (which equates to faster bass) and more phase tuning options.

Edit: Yeah, it was Geddes after all. https://mehlau.net/audio/multisub_geddes/
And I missed the part about your amp being stereo. You can connect the third to either one of the channels. Won't matter, since low bass is mono anyway. Just wire them whatever combination of series/parallel results in a driveable load to your amp.
millercarbon's avatar
millercarbon OP
12,531 posts
 
jbrrp1
Duke has recommended an "all around the room" placement that just spooks my intuitive sense.


Tim followed a very well thought out methodical approach he's posted before but would be great to be included here if he doesn't mind writing it up again.

The locations Tim wound up with are almost exactly what Duke recommends and what I did- basically one per wall, asymmetrically spaced, ie different distances from the corners. Also same as what is recommended in all the research you will find if you go looking around for Geddes, Toole, et al.

I wouldn't say its counter-intuitive, but it sure is counter the status quo. But that's why this thread exists- to counter the counter-productive status quo!

millercarbon's avatar
millercarbon OP
12,531 posts
 
For sure its coming from the main pair. Has to be. People will probably find this hard to believe, but there have been several times when I wasn't sure if mine were making any sound at all. Couple times I would walk right up to one, sometimes not hear it until my head was so close I could touch it, sometimes not even then, sometimes not be sure until I put my hand right on the cone. 

I've used mine stereo and mono and yes, no difference, at least not that I've been able to hear. Maybe with some material it might matter although it seems there is none. No such thing as stereo when it comes to deep bass. 

Imaging either way is outstanding, at least as good if not better than before. I'm sure you're right and this is because all our imaging perception is higher frequency. But the low bass adding the perception of the true recording venue spaciousness adds to rather than blurs or subtracts from what the stereo up front is telling us.

One thing I know for sure, you guys who have had more time with it have had more time to think things over and it shows. Beautiful explanations. To those who haven't tried it, they know what they've been talking about. This is for real.
millercarbon's avatar
millercarbon OP
12,531 posts
 
douglas_schroeder
Many are as derisive of the importance of LF as they are the importance of cables.


lol! The fools! 

I've got Synergistic Research Active Shielding on just about all of mine. Most of my wire has been cryo'd. Including the wire from the breaker box. Which leaves the box at 240v and goes through a pure silver wire step down transformer en route to the Bybee power line conditioner. All the power cables are high end, including the two Electraglide Fat Boys I pulled out of a drawer when I needed them for the two Dayton amps. I been doing this so long back when I bought them there wasn't even an Audiogon on-line because there wasn't even an on-line, so with no market figured why not just keep em? Staggering to think that today, decades after this should have long since been put to rest, that anyone doubts the importance of wire.

But then again once I learned about this I was surprised to discover the idea was not at all new. Not only had Duke been making the Swarm with Audiokinesis for many years, but then I saw a paper by Geddes which was many years before that, and wait it gets better, because in the paper Geddes references work he did THIRTY YEARS before that!

So in reality this is something like fifty year old news, and yet it was news to me, and still would be had I not stumbled across it here by accident. Which is my main motivation in writing, because people need to know. People need to know what a total waste of time it is trying to get good bass any other way. People need to know there is an answer.

Not that I expect it will do much good. People are incredibly good at believing whatever is endlessly repeated regardless of it being true or not. Person? Or parrot? Hard to tell some times.

Oh well. The hardest part, what is always the hardest part for me, is I get to a point where it sounds so doggone good I want to stop messing and just relax and enjoy. That to me is what its all about, relax and enjoy. Little more work but man is it getting close!
millercarbon's avatar
millercarbon OP
12,531 posts
 
douglas_schroeder
You are entering a realm where a LOT of action takes place, ... you are realizing how much of upper end performance is left on the table by persons who discount LF.


For sure and amen. This is something I was sure had to be the case as for years I struggled and gave up long ago in frustration when it seemed impossible due to all the physical constraints of room resonance. The problem is being stuck in the outdated, false, counterproductive and doomed to failure paradigm of one sub. Or even two. Or anything where the focus is on treating really low bass the same as really high treble.

Which is what everyone does. Despite the fact it does not work. Despite the fact it flies in the face of human perception. As Duke and others have pointed out many times, high frequency sounds are heard with such precision we can determine location from within a range of a few milliseconds, yet we cannot hear low frequency sounds that brief at all.

At all!

Another really big problem with the sub approach is even if you somehow with EQ or whatever manage to get fairly smooth response at one location, it always results in really big modes at other locations. But of course the energy in those locations takes time to dissipate, and as it does so it reverberates around the room which takes time which because of the way we hear things we interpret as mushy or slow bass. Someone could tell me that's what's going on. I could read about and understand that's what's going on. But to actually experience it, that is a different thing altogether!

We have all had the experience of the person who comes over and is so shocked to hear imaging for the first time they stare in disbelief or even sometimes get up walk over and touch a speaker. I had a guy one time ask me three times how many speakers, finally get up and walk over and lift the blanket off the TV. Convinced there was a speaker hidden behind it. Well recently between the Herron, ECT, PHT, HFT, etc, etc mine had gotten to the point where sometimes even I would open my eyes to check and see.

But that feeling of fidelity, even though I knew it was missing a lot deeper down until now I had no idea all I was hearing was just the thin skin on the onion. Which already seems to me to be a nice big juicy Yakima Sweet. So hell yeah I will be playing and tweaking. And if my eyes water it'll be from tears of joy.


millercarbon's avatar
millercarbon OP
12,531 posts
 
douglas_schroeder
There is no way to get the same precision with an array of subs
Well if you've heard more precise than this then color me jealous. Because the bass I'm getting is a whole lot more precise, clean, articulate, whatever you want to call it, than the Talon Roc I was using before. Even what I've heard from monster mega-buck Wilsons comes nowhere near this DBA. My post spent more time talking about the sense of space because that's the most interesting aspect.

But I could just as easily have left that out and focused entirely on speed, smoothness, and surprisingly, detail. Nobody thinks of bass in terms of detail. Listening to Pink Floyd Welcome to the Machine on other systems the machine makes this very low throbbing sound. With the DBA you can hear so much detail in this its crazy! The level doesn't just throb up and down, there's lots of times where it changes really fast, and you hear it and feel it, exactly like what it sounds like, a huge door opening and closing.

noble100 Tim, you put it beautifully.

I probably would have done this anyway but your experience was a big help. Duke's too, but guys like him are just an exceptionally rare breed whereas no offense but when it works for normal guys like you then it makes me sure it will work for a normal guy like me as well. I actually wouldn't recommend DIY for anyone who hasn't already done something like this. You don't really save all that much, certainly not in terms of time! lol! Mine still need veneer, which even then covered in Rosewood I doubt they will have quite the professional finish of Dukes Swarm or your Debra. 

The details you're talking about hearing, oh yeah! There's the classic thing of the bass line where the volume changes as the notes go up and down the scale. Gone. The classic thing where the notes go lower and just sort of fade out. Flight of the Cosmic Hippo, the best part fades to almost nothing. Its just so low, it almost disappears. Not any more! Now you hear every note clear and strong and precise.

Which in a way you kind of expect. What I didn't expect was the tremolo. The kind of speed and precision it takes to hear not just the note, but really tiny fluctuations in pitch and volume (tremolo) within the note. And not only on obvious tracks like the Hippo. I've been surprised how many times this shows up with music I had no idea had any low bass content at all!

Just as a reminder, I still have not hardly even begun to dial these things in. Just plopped em down and started enjoying. Levels set almost certainly too high. Crossovers not dialed in, EQ still flat, no playing with phase. Long way from being dialed in. Even so, wow.
More to discover