Grand Prix versus Stillpoints
Anyone compared Grand Prix Monaco to Stillpoints Component stand? In my case it would be for amps.
Stillpoints or Audio Points, has anyone compared
It there a difference in sound, when using Stillpoints and if so, what to expect. Are Stillpoints better than Audio Points. Trying to figure out how
Stillpoints Ultra SS vs spikes on concrete
My speakers are currently spiked on a solid concrete floor through medium weight Berber carpeting. Does anyone know if Stillpoints Ultra SS in place of the
Stillpoints Ultra SS under your speakers
Hi, I'd like to hear anyone's experiences with replacing their speaker spikes with the Stillpoint Ultra SS isolation/vibration control devices. I did a
Nuforce with Stillpoints ERS fabric
Anyone ever try the Stillpoints ERS fabric with Nuforce amps? I have an RFI issue and wondering if this would take care of it. I only have the issue with my
B&W 802 and Stillpoints
Has anyone put their B&W 802's on Stillpoints? I removed the casters, and made plates to accommodate 1/4 inch bolts onto which I placed Stillpoints with
Stillpoints under T W Acustic Raven AC
Hello, I'm on the way for a stand under my T-W Raven AC (one motor) and thinking about a Stillpoint Stand complete with all feet and risers needed. Did
Stillpoints
Which devices benefit more from the stillpoints? cd-players, power amplidiers, loudspeakers, tube-, solidstate?
Stillpoints vs Symposium Rollerballs
Hi I am looking to improve the isolation under my Wadia 16i (it is currently sitting on a Quadraspire Q4 rack) and am considering Stillpoint and
Help understanding the new Stillpoints products
I have written Stillpoints directly and got no answer from them (a bad sign I guess), so I thought I'd ask here. I have liked the still points cones and
Stillpoints Ultra and Wilson Sophia II
I am very intrigued by the new stainless steel and aluminum Ultras fron Stillpoints. So, my questions are these: 1. Have any Sophia owners tried
Audio Aero Capitole MKII & Stillpoints anyone
just wondering if anyone has any experience with using Stillpoint isolation cones or similar as a replacement for the stock BDR cones. Thanks.
stillpoints question
Is it o.k. to put integrated amp directly on top of stillpoints and risers? Any other options-thanks.
stillpoints question
Is it best to use the stillpoints directly under the plinth of my rega 2 or should I use other footers (herbies iso cups ) under the table sitting on a 1 inch
Replace VPI cones with Stillpoints
Anyone tried replacing the standard VPI cone feet with Stillpoints? Did they fit? What was the result?
Stillpoints LP Isolator Record Weight
Has anyone who has auditioned the Stillpoints LP Isolator (LPI) offer their opinion on the turntable accessory? I'm curious if it would provide any advantage
Stillpoints SS Ultra with speakers outriggers
Any experience with Soundocity outriggers ( Stillpoints vs the supplied cones? Key sonic improvements? Thank you! With Acoustic Zen Adagios?
Synergistic New Tesla Line Any comments
dering what I have experienced with the StillPoints, but the demonstration was striking. More so than turning the Galileos on and off. Their room with the YGs and
Building high end 'tables cheap at Home Despot II
ig improvement in sound by substituting Stillpoints for my usual cheap-but-effective 3/8"/16 carriage bolts solution. Will have to see just how much more we can continue
Tidal Speakers owners
the lower side, so I could install the StillPoints component stands that I use instead of that provided by Tidal. On a dealers Tidals, the StillPoints component stands
When is digital going to get the soul of music
been on a slippery and expensive slope. StillPoints products have been a revelation as to how insidious vibrations are. But recently a friend sent me a Hitachi Finemet
Fuses that matter
tion? If so, I entirely agree. With the StillPoints stuff, especially the Ultra Fives, I really have the magic of realism.
Personal speaker evolution
resonance dampeners)Also bought 6 more Stillpoints. 2009 Velodyne DD-12 ($1500 as store demo) I blame my brother for getting me started on this as he was
Anyone listen to Zu Audio's Definition Mk3
oters. What should I be thinking about? Stillpoints? Equarack footers? Wave Kinetics footers etc?
TRL Marantz Sa 14
ours. We found that the SA-14 likes the Stillpoints/HRS Nimbus combination with the balls upward to the SA-14 bottom cover, at least in my system. We used the single
Evolution Acoustics MMMicroOne
nt. I have screwed around with Stillpoints with my current speakers (which their stands were designed around), Sistrum stands for electronics and now room/wall
Interconnect with great dynamics and bass slam ,
with three Acoustic Energizers and four StillPoints Ultra Fives seeking the benefits of these when strategically placed. Last evening we sat down and thoroughly enjoyed
New Maplenoll Ariadne owner needing advice
ders : A good friend suggested that the Stillpoints Universal Resonance Dampers would be a perfect match for the 'Noll . A couple days later the Stillpoints and Risers
Cheap tweaks What would YOU reccomend
ERS sheets from Stillpoints.USA or from Audio-Buff.com. I've just started using these sheets. In my system they are a keeper. Check out the mini
Do you believe in Magic
about Magic. On a whim, I bought some Stillpoints ERS Fabric . I installed it in my preamp (which is filled with noisy digital circuitry) and a reclocker (also noisy)
Albert Porters after market panzerholz plinths
oo much at this stage). footers will be stillpoints as per albert porters technics although costs may mean i do cheap copy until i can afford them. also have to decide on
SP10 Mk II vs Mk III
ooters seem to work with the SP10 mkll? Stillpoints, Herbies, Mapleshade to name a few, I would like feedback to form a starting point.
Equipment that has made you 'stop' looking
StillPoints isolation feet, except the Ultra Fives are better than the Ultra SSs.
Copper Sleeve over IEC
I've tried the Stillpoints ERS cloth wrapped around various IEC's in my equipment, serves same function. Sometimes beneficial, other times
Technics SP 10 mkII speed adjustment question
looking for a new mat and waiting for 4 Stillpoints cones and risers to complete it all. If I tell that I was moving from a Rega P3 to this set-up, you will
High Fidelity Cables CT 1designed by Rick Schultz
top of my Exemplar XP-2 which was on 4 StillPoints Ultra SSs on their Grids on their Rack. I decided to replace the MIGs with 4 SP Ultra SSs. I must say that
I Just Don't Hear It I wish I did
est footers I have used. That includeds stillpoints, aurios pro-bearings, maple-shade brass points, Townshend sinks, Granite surface plates, and so on---Yeah---I have
What is “warmth” and how do you get it
changing the footers under my CDP from Stillpoints to HRS Nimbus Couplers. I really liked what the Stillpoints did, but at times my system sounded a little “thin”.
What is Musicality
ances? Maybe if they put the drumset on stillpoints it would expand the soundstage some. Just a suggestion I read on Steve Hoffman forum. You knew I would get that in
Halcyonics under my tt Wow
e I sold my two Halcyonic bases for the StillPoints Rack. I don't know what having everything on Halcyonics, but having everything on the StillPoints Rack was better than
Damping Vibration Friend or Foe
Have you had any experience with Stillpoints ? If so, what was or is your opinion on their capabilities ? I use them under my pre-amp,
Modwright SWL 9 0SE Pre your thoughts welcome
I use Stillpoints with Risers under both Dans pre and his modded 3910 with great results.
Da Vinci AAS Gabriel
forum that even with isolation I found stillpoints to be a benefit. That also says something. But what I don't know (and I do wonder). It was immediately audible. I
Recent equipment you hated, thought overpriced
David12 Stillpoints Ultra SS, really? Under what component did you use them?
Tweaks for EMM CDSA SE
eat effect. Sold the cerebase & all the stillpoints. I also recomend changing the fuse on the CDSA-SE to a Furutech T2A. I sorted my GREEN Furutech 20mm fuse from
Best Isolation HRS SRA Zoethecus Symposium
r platform even comes close to what the StillPoints Ultra Stainless Steel feet do for isolation. I don't sell them nor have any involvement with this company and they are
Insanely Expensive and Worth Every Penny
because of their expense. Later I got a StillPoints Rack and two Component stands. With everything on StillPoints, my sound was much better. Of course I don't know what
Best Tweak
ded connections such as equipment feet, stillpoints, etc., on the Triplanar Tips thread. Not sure why I never thought of this previously but it has turned out to provide
Speaker Spikes do the shake test
my Avantgarde speakers, includ. cones, Stillpoints, NVS, Herbies sliders, etc. All of them do change the sound, and not always to the better. Just to save time and
Raven One
n upgrade to better isolation feet like Stillpoints or Boston-Audio tungsten carbide balls carbon feet worthwhile or are the regular points good enough?
Raven One Owners Last Table
ice is pprobably due to the addition of Stillpoints, and the new powersupply which is better than the old one.
Merrill Audio VERITAS Amps: Any other experiances
posts, fuses and anti vibration (think Stillpoints Ultra Mini). Unless you have heard the Mods do not comment. But if you have the system that can take advantage
Weakest Link Your honest opinions
tition wall, perhaps with some borrowed stillpoints. Is the rest of the kit on a good solid rack, perhaps with some more basic footers, such as the excellent range from
Which companies deserve a star for Christmas
Horizons, Ayon, Morrow Audio, Nuforce, Stillpoints, Von
TW Raven Owners: Set Up Questions
I saw the thread about loosening the Stillpoints. Initially I had an issue with using the rough side of belt. The belt shimmied up/down on the pulley at a specific spot
Hypex Ncore NC1200 Amps at NY Audio Show in April
dia, Norton, Synergistic Research, B&W, Stillpoints (current version), PSA PW DAC MK II, Pass Labs, and many more... But it is very rare that a new "tech"
Do stands make a difference for equipment
rum fan and they offer a trial period. Stillpoints and Equarack are also good products that I have used. Try them and see for yourself. Don't be swayed by vague,
Got a New CD Player and Now I'm Bummed
You might want to try adding Stillpoints under your table. These seem to have a very strong following for providing amazing enhancement to turntable support.
European Vibraplane
urntable and very cost effective. Four Stillpoints Ultras is $900.00. You can purchase a used Vibraplane for that and pick up a cheap pump and be in business. I
Footers
absolutely worked for me. I also tried Stillpoints and Isoblocks as footers. They both cleaned up the sound but they also reduced the energy and, more importantly,
Home Entertainment Show in Los Angeles
The loudspeakers in the Berning/Stillpoints room were Peak Consult InCognito X. Terrific sounding room. John Atkinson liked the room a lot. He also liked
Best Isolation Device for Speakers
Speaker Stand Mana Speaker Stand Stillpoints Audiopoints Thanks,
Screw down reflex clamps vs record weights
I have been experimenting with the Stillpoints LP1 on my Kuzma XL, which is normally supplied with a heavy screw-down clamp. It definitely changes the sound in the
Best power amp for Avalon Opus Ceramique
pling the speakers and electronics with Stillpoints. To me these devices act along the entire frequency range. They make the sound better flow without colorations.
Stillpoint Ultras anyone
Leema Antilla CDP, against my existing Stillpoints with Risers and Black Ravioli footers. The difference, well marginal at best, a bit tighter base and better dynamics,
rumble issues see old thread update
s cause smearing in the midrange. I use Stillpoints between my plinth and the granite to remove the ill effects from the granite. FWIW, I can tap on my stand and
Recommendations for 5k upgrade
one BDR shelf under the preamp, some Stillpoints (planning to experiment with alternatives like Aurio, Symposium, etc, under the devices, maybe some for under the
Raven One Motor Noise Problem
or or a resonating issue with the newer Stillpoints. Curious.
Maple or Granite
til, I bought the resonance dampers The Stillpoints. The Stillpoints sit beneath my unsuspended turntable that sits above a 4hx15wX18d" custom-made platform
What to put under my VAC AMP/ PREAMP
Sistrum stand,
Is it possible to transform the EMM CDSA SE
all have tried. I have mine on stillpoints which in turn is suspended on a spring based plinth on a nice 200 lb rack. Sound is quite good. I also use a nice
What isolation feet to use
ot;, "Aurios bearings", "stillpoints", and the latest Marigo "mystery feet". The "mystery feet" enhance the musical presentation
Amp stands for Pass Labs
Stillpoints Component Stands. 3 or 4 leg. The best!
Best treatment for speaker feet
Stillpoints SS Ultra's, anyone have an opinion?
Original VPI Aries vs VPI classic 3
ig jump in performance when I added 3 x StillPoints to an original Aries with a JMW-12 arm. I hear more from the Aries / JMW-12 than I ever did on a Classic 3 using the
Any tweaks recommded for under cd player
I use stillpoints, doesn't really extend the high end but makes it more defined, improved sound stage depth and adds clarity. I have at
VAC Signature MKIIa pre amp
I might suggest to try a set of Stillpoints under the VAC. I find it offers a significant improvement no matter which amp or set of speakers I am using at the
Go with a tube preamp or not
with Path stands and a total of 6 Stillpoints per side. I use a Velodyne DD12 to augment the low end. Cabling is mostly Ridge Street Audio with one pair of Jungson
Black Diamond Racing Shelf for EMM CDSA
the lookout. Someone I know recommends Stillpoints for the EMM player, but, like I said, I want something more substantial. Some of these alternate feet are
Stillpoint component stand with Verity Parsifals
a stillpoint, so I take it you screw 4 stillpoints under the speaker and put them on four inverted risers that come with the component rack. Is this how it
hardwood floor and speaker
ttle impact. I think now, however, that StillPoints component stands greatly outperform them, but they are expensive. You might get by with just 3 individual StillPoints
TW Acustic Raven One owners
like it alot I didn't know that Oem Stillpoints matter .. I have levelled the slate base so I haven't used the TT foot Btw even if you tight the new foot the are a
High End Isolation HRS, SRA, Active platforms
I've used an HRS platform, Stillpoints cones, Finite Elemente Ceraballs and Cerapucs, and Equarack footers. The only isolation devices sitting under all my
Turnable Rack Vibration
on. Things like spikes, roller blocks, Stillpoints, iso-platforms, etc. will drain away vibrations created by the TT mechanism (and I suppose the cartridge itself ;--)
Isolation for a table for floors with movement
The stands to own HRS, Stillpoints, Finite Element - a used one on gon now. If you are going for less costly approach Arcici makes two satnds a Reference
What's under your amp
Underneath I have Stillpoints with risers sitting on top of a 2 inch thick maple amp stand. On top a VPI brick for right now, I've used HRS
What should be under my speakers
Sistrum stillpoints under my Thiel 3.6 into an oriental rug over a cement floor works very well for not a lot of money.
JBL lovers
0cx, Ayon 2s,taralabs, the one, cables.,stillpoints uitra ss footers, most speakers are over hyped!
SRA Isolation Platform under a Turntable
d love it. I did try my nottingham with stillpoints and got increased detail that at times was a bit bright and fatigueing. I tried a maple butcher block, did improve
Is RAVEN TABLE that good over sme or Walker
For those who added Stillpoints to the Raven later, how did this change the sound? Was it noticeable?
Tidal have you heard them Are they your favs
would be greatly improved using the new StillPoints Ultimate SS feet. I put them under my Contrivas just before the show and could not believe the improvement I heard in
tt isolation help
iso-cup with the marble type balls , or stillpoints, or herbies tenderfeet.
turntable isolation feet
I would save money to eventually buy Stillpoints Ultra SS feet. You only need 3.
Rollerblocks under turntable
tter in this case, experiment is to try Stillpoints. Why don't you just sell the VPI and buy a table with a properly designed suspension? Or, buy a better non-
Walker Valid Points or Mapleshade Footers for preamp
rI have tried over the last few years, Stillpoints cones, Finite Elemente Ceraball (original), Finite Elemente Cerapuc, Cardas blocks, EquaRack MF-1 footers and HRS M3
Which 12AX7 tubes for EAR 834P phono stage
I meant Stillpoints.
Any info on the new Audio Research VS115 tube amp
'Hi, does anyone have checked VS115 on stillpoints or not, change its powercord or not, I was using the VDH mainsteam cord\'
Anyone try decoupling speakers from the room
I'm using Stillpoints and to me, I think they sound a ton better than the Piega spikes. Tighter bass, more solid image, clearer midrange.
AVALON OWNERS
Hi, I use Stillpoints with inverse risers under my Eidolons. They excell with their overall performance.
Footers for Esoteric SA50 CD SACD Player
I got great results with Stillpoints w/ the risers under my SA-10. I bought the Stillpoints first w/o the risers and they definitely "cleaned"
|
|
