Ohm Walsh Micro Talls: who's actually heard 'em
250w/ch or 500 w/ch Class D amp like a Bel Canto, Rowland or something similar. The A3CR has been an over achiever with the 5's so far though. I was
The best CD Player for the money
st Blue Heaven to Audio Artistry Dvorak mains (Linn wire to subs powered by Carver A/V receiver).
Zu Druid & Definition Roundup
uided, before any consumer wears that label. I've plainly written here for years that I will only ever recommend a very short list of gear, for anyone who asks me,
450 Pound Monobloc Amplifier
My Class D Bel Canto monoblocks are each 8.5" (216mm) W by 3.5" (88mm) H by 12" (305mm) D. Weight: 18.5 lbs (9kg). 500w/ch.
Is too much power in an amp really a problem
a class D or ICE configuration… as in a Bel Canto, PS Audio, Spectron, Wyred 4 S, etc., to use for both music and HT with my current Silverline speakers. Several
Not wasting my time on new Digital
my original Theta Gen V and even my Bel Canto DAC for a fraction of the cost, even my Micromega DAC hands down. Anyway are there any other people experience the
Small form factor, budget DACs
I highly recommend the Bel Canto DAC 1.1, at around $550 used. I owned the earlier CI DAC (your price seems to indicate the new one), and while it was
Help with a system for a guy into electronic music
ailing in subs as your extension to the mains, not overlapping (regardless of floorstander or standmount) which I think is the correct way. Also if you can
Anybody listen to Ohm Walsh speaker w/digital amp
such a set-up with say a PS Audio, or Bel Canto, digital
Small Speakers For A Large Room
have a separate powered subwoofer, but mains that visually dominate the room are not an option for me. If you know of small-ish speakers that sound large, I'd
Best AV processors for under 10K
8801/Oppo105 a killer combo , I run my mains fullrange with no sub at times for 2/ch sacd,usb or redbook playback because my room is well treated and the
digital eq/room correction trade offs
listening to CDs and SACDs using my Bel Canto PL-1A. I go analog out to my pre-amp. Is it worth it to contemplate the extra step of analog to digital for room EQ
USB DAC's
SE, ATC 50 ACM Actives, Vertex AQ Taga mains filtration, Mac Mini & WD Hard Drives. Any guidance would be greatly appreciated, I have looked at Empirical Audio
confused with HT bypass
my two systems can share my 2 channel mains and if so how to do it. To clarify, here are the system highlights. the pre/pro is a denon AVR-1910. this unit has no
Speaker Upgrade Suggestion
Rotel RCD 1070 cdp, Anthem MCA 20 (l/r mains) and MCA 30 (center and surrounds)with Kimber PBJ interconnects. Current speakers are Monitor Audio Silver S10's
Can I hook up sub directly to amp
nd the amp. The cd player would be a Bel Canto CD2 which has no inputs but has volume control. That is why I wonder if you can just hook up wire from sub to
Need a 2 channel amp for rear speakers 7 1
d by another Theta and biamp your L & R mains and center with one. And the rest with the other. If I am not mistaken you can buy the Thetas with 2 to 5 channels.
High End Universal Players
Theatermaster Signature Dynaudio 3.3 mains, JM Lab cobalt 800s rears and center speaker and Jm Lab sub Utopia 2 Thinking of perhaps a Esoteric,Bel Canto or ???
Why are people selling there Marantz pm 11s1's
there at the top. I have heard the Bel Canto Ref1000's/Pre3, Bryston 4B SST/BP26-DAC, Classe CA-2200/CP-700 and although these are powerful combos; the Marantz gave
Is Mc a step up on the prima luna's
ass D amp and it really woke up my 803D mains (the amp...the preamp bought out the richness and bloom i'd been seeking). I like this combination with the B&W
Multi Channel, Light Duty, Economical, Digital Amp
D amps that I am aware of (Rowland, Bel Canto, Wyred 4 Soud, Spectron, D-Sonic, etc.) are all a bit -- and some significantly -- more spendy than I suspect the task
AV reciever as a pre 2 Ch amp for mains
I have went the AV route and bought a Marantz SR 6003. I like it yet I noticed my main fronts don't quite have the speed and bass control as My Bel Canto
Bel Canto Power Supply change to 230V How
I write from Asia and I am considering to buy a pair of Bel Canto monos 1000Ref and also the Bel Canto DAC 3. However, in the US, the power supply is 110V. In
|
|
